On Sun, Aug 21, 2005 at 06:24:34PM +0200, Alexander Schmehl wrote: > * Csanyi Pal <[EMAIL PROTECTED]> [050821 17:18]: > > I have the monitor PC2000 F17 69T. > > It was given to me yesterday, but without the manual. > > I need the technical informations bellow to set up my X Window: > [..] > > Has anybody these informations? If so, please tell me! Thanks! > > Take a look at read-edid [1], which might find that information for you.
sudo get-edid get-edid: get-edid version 1.4.1 Performing real mode VBE call Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0 Function supported Call successful VBE version 300 VBE string at 0x11110 "Brookdale-G Graphics Chip Accelerated VGA BIOS" VBE/DDC service about to be called Report DDC capabilities Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0 Function supported Call successful Monitor and video card combination does not support DDC1 transfers Monitor and video card combination does not support DDC2 transfers 0 seconds per 128 byte EDID block transfer Screen is not blanked during DDC transfer Reading next EDID block VBE/DDC service about to be called Read EDID Performing real mode VBE call Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0 Function supported Call failed The EDID data should not be trusted as the VBE call failed Error: output block unchanged Thank you Alexander, but as You see abowe, I can't get the wanted informations. -- Regards, Paul Debian Junior Project, DebianEdu, Moodle -> :-) :-) :-) :-) :-) :-) :-) http://www.ektf.hu/~Csanyi.Pal (Up to now, it is in Hungarian only.) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
