At 11:33 13/08/2005, you wrote:
At 12:22 12/08/2005, you wrote:
On Friday 12 Aug 2005 12:03, TreeBoy wrote:
> The instructions I followed were:
>
> http://linux-usb.sourceforge.net/SpeedTouch/docs/sargehowto.html
>
> However, you do *not* need to do configure the kernel.
>
> You *do* need to "apt-get install speedtouch"!
>
> You do *NOT* need to install hotplug - 'cos it's already there.
>
> You *do* need to get the firmware!
>
> You do not need to install the hotplug script the "apt-get install
> speedtouch" inserts that for you.
>
> You need to configure PPPoA and create your /etc/pppp/peers/ file. I
called
> mine "demon" and it looks like this:
>
> debug
> lcp-echo-interval 10
> lcp-echo-failure 3
> noipdefault
> defaultroute
> user "[EMAIL PROTECTED]"
> noauth
> noaccomp
> nopcomp
> noccp
> novj
> holdoff 4
> persist
> maxfail 25
> updetach
> #usepeerdns
> plugin pppoatm.so
> 0.38
>
>
> Notice that I have commented out "usepeerdns" this is because of other
> parts of my setup.
>
> Next, you *do* need to setup chap-secrets and pap-secrets with your
> details.
>
> libatm1 should be installed as a dependency of speedtouch.
>
> That should be it - now just "Plug and Play"!
>
> Good luck.
>
> TreeBoy
Some of this may not be necessary if you are running a >2.6.10 kernel.
This explains:
http://www.debianhelp.org/module-pnForum-viewtopic-topic-9551-start-0.html
I'm running 2.6.11 kernel so that implies just download the relevant file
(speedtouch-firmware_0.3012k_all.deb). I then did a 'dpkg -i' on this (is
that all I need to do?!??!), set up peers/demon based on above and amended
pap_secrets to end:
-- begin snippet --
# OUTBOUND connections
# Here you should add your userid password to connect to your providers via
# PAP. The * means that the password is to be used for ANY host you connect
# to. Thus you do not have to worry about the foreign machine name. Just
# replace password with your password.
# If you have different providers with different passwords then you better
# remove the following line.
(none) * password
michael * [demon password]
-- end snippet --
but maybe that should be my demon login not my localhost login? (neither
seem to work!)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
