Hi, I have the following devices in my system:
hda: SONY CD-RW CRX195E1, ATAPI CD/DVD-ROM drive hdc: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive hdd: Toshiba DVD-ROM DSM-1712, ATAPI CD/DVD-ROM drive I want my hda and hdc to be ide-scsi device, while hdd being ide-cd. This is my /etc/modules - - - - >8 - - - - $ cat /etc/modules # /etc/modules: kernel modules to load at boot time. # # This file should contain the names of kernel modules that are # to be loaded at boot time, one per line. Comments begin with # a "#", and everything on the line after them are ignored. ide-cd ignore='hda hdc' ide-detect sd_mod ide-scsi - - - - >8 - - - - Which I think should work. However, after reboot, the result is not what I expected: - - - - >8 - - - - $ cdrdao scanbus Cdrdao version 1.1.9 - (C) Andreas Mueller <[EMAIL PROTECTED]> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'schily-0.8' 2,0,0 : SONY , CD-RW CRX195E1 , ZYS5 qd=": ERROR: unknow subsystem (scd0) in (/dev/sr0) ATAPI:0,0,0 HL-DT-ST, CD-RW GCE-8526B , 1.03 ATAPI:0,1,0 Toshiba , DVD-ROM SD-M1712, 1808 - - - - >8 - - - - I.e., my hdc is not ide-scsi but ide-cd. However, if I load modules manually from command line, I get what I want: - - - - >8 - - - - % rmmod ide-cd ide-scsi; modprobe ide-cd ignore='hda hdc'; modprobe ide-scsi $ cdrdao scanbus Cdrdao version 1.1.9 - (C) Andreas Mueller <[EMAIL PROTECTED]> SCSI interface library - (C) Joerg Schilling Paranoia DAE library - (C) Monty Check http://cdrdao.sourceforge.net/drives.html#dt for current driver tables. Using libscg version 'schily-0.8' 2,0,0 : SONY , CD-RW CRX195E1 , ZYS5 2,1,0 : HL-DT-ST, CD-RW GCE-8526B , 1.03 qd=": ERROR: unknow subsystem (scd0) in (/dev/sr0) qd=": ERROR: unknow subsystem (scd1) in (/dev/sr1) ATAPI:0,1,0 Toshiba , DVD-ROM SD-M1712, 1808 - - - - >8 - - - - This is very strange! BTW, looking at the dmesg output, I can see that hda & hdc have been successfully ignored by ide-cd: - - - - >8 - - - - % dmesg | grep hd SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) hda: SONY CD-RW CRX195E1, ATAPI CD/DVD-ROM drive hdc: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive hdd: Toshiba DVD-ROM DSM-1712, ATAPI CD/DVD-ROM drive ide-cd: ignoring drive hda hdc: attached ide-cdrom driver. hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache hdd: attached ide-cdrom driver. hdd: ATAPI 48X DVD-ROM drive, 192kB Cache hda: attached ide-scsi driver. ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA ide-cd: ignoring drive hda ide-cd: ignoring drive hdc hdd: attached ide-cdrom driver. hdd: ATAPI 48X DVD-ROM drive, 192kB Cache hda: attached ide-scsi driver. hdc: attached ide-scsi driver. - - - - >8 - - - - How is it happening? What is the fix? Thanks Sorry the post is a bit long. But hope I've covered all that should be covered. tong -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
