Hopefully those people who replied to this issue earlier can respond.
If you recall I had a problem with a server crashing (read below). I
started doing a memtest on the server itself while operating. It has
been running now 3 days. The server has not once crashed that whole
time. But this morning I stopped the memtest. Zero errors were
reported out of some 300+ tests. Then within minutes, it crashed. Now
isn't that peculiar?
Any explanation out there?
Curtis
On 19 juil. 05, at 13:54, Curtis Vaughan wrote:
On 19 juil. 05, at 12:35, TreeBoy wrote:
On Tuesday 19 Jul 2005 19:30, Curtis Vaughan wrote:
The only time this happened to me was when I had broken RAM.
Can you afford to run memtest on the machine for a couple of days
in order to
rule it out.
I swapped the RAM into another machine and it eventually failed
memtest on
the third day of testing - but I haven't had another failure since.
(Fingers
crossed.)
Cheers,
Ok I started running memtest, but I'm not sure exactly how to use
it.
First, I tried memtest 100m --log, but that pretty much stopped the
computer from doing anything else. So, I stopped that test and
put it
to 50m. But am I doing this right? Oh, by the way I think I have
somewhere around 120 Mb RAM
Hi.
This is why I asked if you could "afford to" do the test.
I was lucky because I had a spare machine and spare RAM: I swapped
the RAM and
put the "dodgy" RAM into the spare machine. I then used a Knoppix
boot CD and
booted into a memtest on the spare machine.
This meant that while the test was happening, I was not otherwise
using the
machine.
Sorry.
Yeh, I think I can do that. But if I just leave it testing 50m
would it show a problem if one exists? Or do I need to run memtest
at full 120m? And finally am I issuing the command right? Or is
there some other parameter(s) I should use?
Curtis
PS. The conversation about types of RAM is not bothering me so if
it's constructive for others by all means continue.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] a
subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]