I'm using the hplip driver with cups, and running into an anoying problem. Something is getting hung at the end of each job. Here's some data points: o there's no pause between pages, only a pause between jobs (a multipage job doesn't hang between pages - only after the last page) o the power light on the printer flashes after the last page, and during the 5 minute pause o hitting the cancel button on the printer stops the power light flashing, but jobs are still hung for 5 minutes When debugging is enabled, here's the log tail when it hangs: D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->header.Duplex = 0 D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->page = 1 D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->ppd = 0x89fbfb0 D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->ppd->flip_duplex = 1 D [20/Jul/2005:10:19:38 -0400] [Job 25] width = 4658, height = 6667 D [20/Jul/2005:10:19:38 -0400] [Job 25] PageSize = [ 595 842 ], HWResolution = [ 600 600 ] D [20/Jul/2005:10:19:38 -0400] [Job 25] HWMargins = [ 18.000 36.000 18.000 6.000 ] D [20/Jul/2005:10:19:38 -0400] [Job 25] matrix = [ 8.333 0.000 0.000 -8.333 -150.000 6966.667 ] D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->header.Duplex = 0 D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->page = 1 D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->ppd = 0x89fbfb0 D [20/Jul/2005:10:19:38 -0400] [Job 25] cups->ppd->flip_duplex = 1 D [20/Jul/2005:10:19:38 -0400] [Job 25] width = 4658, height = 6667 D [20/Jul/2005:10:19:38 -0400] [Job 25] PageSize = [ 595 842 ], HWResolution = [ 600 600 ]
-- Tom Vier <[EMAIL PROTECTED]> DSA Key ID 0x15741ECE -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
