Dear List, I've previously posted this question in linuxquestions.org, but having gotten no replies, I'm posting here; apologies for those who've already read it.
I have a webcam (ID 0c45:6029 Microdia Triplex i-mini PC Camera) which was working fine under kernel 2.6.10, in my hard disk installation of MEPIS 3.3 (a Debian based distro). I had been using gnomemeeting with this webcam. However, after upgrading (from the MEPIS apt pool) to the kernel 2.6.11.6 image, the webcam stopped working in gnomemeeting, despite making sure that gnomemeeting was correctly configured. The new kernel does load the appropriate driver, namely, sn9c102 module at startup (I presume hotplug takes care of it). I'd appreciate some feedback to try and pin down the problem. I'm including the output of lsmod below, first with the previous kernel 2.6.10 where the webcam was working fine: ,-----[ lsmod-2610 ] | Module Size Used by | i830 79204 2 | intel_mch_agp 7952 0 | sworks_agp 6944 0 | amd_k7_agp 5772 0 | ali_agp 5248 0 | sis_agp 5892 0 | ati_agp 6412 0 | nvidia_agp 5788 0 | via_agp 7424 0 | intel_agp 18204 1 | agpgart 27048 11 intel_mch_agp,sworks_agp,amd_k7_agp,ali_agp,sis_agp,ati_agp,nvidia_agp,via_agp,intel_agp | parport_pc 30660 1 | lp 8748 0 | parport 20032 2 parport_pc,lp | binfmt_misc 8840 1 | c4 16900 0 | b1pci 7168 0 | b1dma 13828 1 b1pci | b1 21120 3 c4,b1pci,b1dma | capi 14656 0 | capifs 3976 2 capi | kernelcapi 36384 5 c4,b1pci,b1dma,b1,capi | ipv6 231296 23 | af_packet 16648 0 | pcmcia 16900 0 | yenta_socket 17920 0 | pcmcia_core 45632 2 pcmcia,yenta_socket | 8250 18180 0 | serial_core 18048 1 8250 | nls_iso8859_1 3968 1 | ntfs 165904 0 | e100 31744 0 | mii 3968 1 e100 | snd_intel8x0 27200 2 | snd_ac97_codec 66936 1 snd_intel8x0 | snd_pcm_oss 46112 0 | snd_mixer_oss 15872 2 snd_pcm_oss | snd_pcm 77832 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss | snd_timer 20612 1 snd_pcm | snd 45668 8 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer | soundcore 7264 2 snd | snd_page_alloc 7428 2 snd_intel8x0,snd_pcm | ndiswrapper 114356 0 | p4_clockmod 3976 0 | speedstep_lib 3460 1 p4_clockmod | freq_table 3332 1 p4_clockmod | thermal 11016 0 | processor 19764 1 thermal | fan 3332 0 | button 5136 0 | battery 8324 0 | ac 3588 0 | floppy 52816 0 | ip_tables 16640 0 | evdev 7168 0 | sn9c102 55452 0 | videodev 7424 1 sn9c102 | uhci_hcd 28944 0 | ohci_hcd 19080 0 `----- and then with the new kernel 2.6.11.6 where the webcam is not working in gnomemeeting: ,-----[ lsmod-2611 ] | Module Size Used by | udf 80132 0 | sg 29344 0 | i830 24960 1 | drm 57364 2 i830 | intel_mch_agp 8464 0 | sworks_agp 7456 0 | amd_k7_agp 6284 0 | ali_agp 5760 0 | sis_agp 6404 0 | ati_agp 6924 0 | nvidia_agp 6172 0 | via_agp 7808 0 | intel_agp 19100 1 | agpgart 28080 11 drm,intel_mch_agp,sworks_agp,amd_k7_agp,ali_agp,sis_agp,ati_agp,nvidia_agp,via_agp,intel_agp | parport_pc 31172 1 | lp 9480 0 | parport 20544 2 parport_pc,lp | binfmt_misc 9224 1 | c4 17284 0 | b1pci 7552 0 | b1dma 14340 1 b1pci | b1 21376 3 c4,b1pci,b1dma | capi 15552 0 | capifs 4360 2 capi | kernelcapi 37248 5 c4,b1pci,b1dma,b1,capi | ipv6 229536 24 | af_packet 17160 0 | pcmcia 19088 0 | yenta_socket 19080 0 | rsrc_nonstatic 8960 1 yenta_socket | pcmcia_core 41120 3 pcmcia,yenta_socket,rsrc_nonstatic | 8250 21572 0 | serial_core 18304 1 8250 | nls_iso8859_1 4352 1 | ntfs 167184 0 | e100 32000 0 | mii 4352 1 e100 | snd_intel8x0 27840 2 | snd_ac97_codec 67448 1 snd_intel8x0 | snd_pcm_oss 46880 0 | snd_mixer_oss 16512 2 snd_pcm_oss | snd_pcm 77956 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss | snd_timer 21124 1 snd_pcm | snd 46820 8 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer | soundcore 7776 2 snd | snd_page_alloc 7812 2 snd_intel8x0,snd_pcm | ndiswrapper 122620 0 | p4_clockmod 5012 0 | speedstep_lib 3844 1 p4_clockmod | freq_table 3984 1 p4_clockmod | thermal 11400 0 | processor 20812 1 thermal | fan 3716 0 | button 5520 0 | battery 8836 0 | ac 3972 0 | floppy 53264 0 | ip_tables 21376 0 | sn9c102 68260 0 | videodev 8064 1 sn9c102 | evdev 7552 0 | uhci_hcd 28688 0 | ohci_hcd 18952 0 `----- As you can see, the only major differences are that modules udf, sg, drm, and rsrc_nonstatic are loaded in 2.6.11.6, but not in 2.6.10. Does anybody have a hint as to where/what to look for? -- Sebastian P. Luque -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
