On Sarge, I needed to do (24) modprobe pdcraid
on 2nd console in order to get the ataraid device listed when partitioning, but then I was not able to install grub or, even if installed, I was not able to reboot (error 21) For 2.6, it seems that d-i has not "hardware" raid support at all I finally changed the jumper on board to switch off the raid feature, then made a software raid. It worked, is more flexible (I have now / as raid1 and my /gisdata as raid0) and I can't see any difference about performance. cheers, Roman On Tue, 5 Jul 2005 16:14:44 +0200 Gömöri Zoltán <[EMAIL PROTECTED]> wrote: > Hi, > > I'm not a very experienced user. I was using Debian Woody on a machine > containing an integrated Promise FastTrak 100 Lite controller in RAID1 > (MSI Pro266TD Master-LR motherboard). I tried to install Debian Sarge > on this hardware, but it looks like it doesn't detect this hardware > correctly. > When I start the woody installation with the 2.4 kernel I get the > following devices at the disk drive configuration: > /dev/ataraid/d0 > /dev/hdg > /dev/hde > > selecting the first one installs the system correctly. > > When I tried this with sarge (2.4 kernel, 2.6 kernel, doesn't mather) > I get the following devices at the disk drive configuration: > IDE5 master (hde) > IDE6 master (hdg) > > It looks like, that the installer only detect the bare drives, but not > the raid controller. > If I choose one of the drives it install the system but I get a kernel > panic on the first system start. > > Can anybody tell me how can I install sarge on the configuration > above? > > Thank you in advance > Zoltan > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
