I just installed the 3.3p1-0.0potato6, and did not have the X11 forwarding.
So I changed...
/etc/ssh/sshd_config:
X11Forwarding yes
/etc/ssh/ssh_config:
Host localhost
ForwardAgent yes
ForwardX11 yes
All worked after that... Hope it helps,
--Jay
On Wed, Jun 26, 2002 at 02:08:04PM +0300, Jerome BENOIT wrote:
> Please find attached the output.
>
> Colin Watson wrote:
> > [No need to cc me, I read the list.]
> >
> > On Wed, Jun 26, 2002 at 01:40:37PM +0300, Jerome BENOIT wrote:
> >
> >>Colin Watson wrote:
> >>
> >>>Are you connecting to the remote host using 'ssh -X'?
> >>
> >>I have just try it, I got th same error message.
> >
> >
> > OK, then add the -v option and show us the output.
> >
>
> OpenSSH_3.3 Debian 1:3.3p1-0.0potato6, SSH protocols 1.5/2.0, OpenSSL
> 0x0090603f
> debug1: Reading configuration data /home/jgmb/.ssh/config
> debug1: Applying options for Boltz
> debug1: Applying options for *
> debug1: Reading configuration data /etc/ssh/ssh_config
> debug1: Rhosts Authentication disabled, originating port will not be trusted.
> debug1: ssh_connect: needpriv 0
> debug1: Connecting to 195.251.7.252 [195.251.7.252] port 22.
> debug1: Connection established.
> debug1: identity file /home/jgmb/.ssh/identity type 0
> debug1: identity file /home/jgmb/.ssh/id_dsa type 2
> debug1: Remote protocol version 2.0, remote software version OpenSSH_3.3
> Debian 1:3.3p1-0.0potato6
> debug1: match: OpenSSH_3.3 Debian 1:3.3p1-0.0potato6 pat OpenSSH*
> Enabling compatibility mode for protocol 2.0
> debug1: Local version string SSH-2.0-OpenSSH_3.3 Debian 1:3.3p1-0.0potato6
> debug1: SSH2_MSG_KEXINIT sent
> debug1: SSH2_MSG_KEXINIT received
> debug1: kex: server->client aes128-cbc hmac-md5 none
> debug1: kex: client->server aes128-cbc hmac-md5 none
> debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
> debug1: dh_gen_key: priv key bits set: 135/256
> debug1: bits set: 1606/3191
> debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
> debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
> debug1: Host '195.251.7.252' is known and matches the RSA host key.
> debug1: Found key in /home/jgmb/.ssh/known_hosts:3
> debug1: bits set: 1545/3191
> debug1: ssh_rsa_verify: signature correct
> debug1: kex_derive_keys
> debug1: newkeys: mode 1
> debug1: SSH2_MSG_NEWKEYS sent
> debug1: waiting for SSH2_MSG_NEWKEYS
> debug1: newkeys: mode 0
> debug1: SSH2_MSG_NEWKEYS received
> debug1: done: ssh_kex2.
> debug1: send SSH2_MSG_SERVICE_REQUEST
> debug1: service_accept: ssh-userauth
> debug1: got SSH2_MSG_SERVICE_ACCEPT
> debug1: authentications that can continue:
> publickey,password,keyboard-interactive
> debug1: next auth method to try is publickey
> debug1: try pubkey: /home/jgmb/.ssh/id_dsa
> debug1: input_userauth_pk_ok: pkalg ssh-dss blen 433 lastkey 0x8089e58 hint 1
> debug1: read PEM private key done: type DSA
> debug1: ssh-userauth2 successful: method publickey
> debug1: fd 5 setting O_NONBLOCK
> debug1: channel 0: new [client-session]
> debug1: send channel open 0
> debug1: Entering interactive session.
> debug1: ssh_session2_setup: id 0
> debug1: channel request 0: pty-req
> debug1: Requesting X11 forwarding with authentication spoofing.
> debug1: channel request 0: x11-req
> debug1: channel request 0: shell
> debug1: fd 3 setting TCP_NODELAY
> debug1: channel 0: open confirm rwindow 0 rmax 32768
> ]0;Boltzmann:~[40;1;37mBoltzmann>[0;m exit
> logout
> debug1: client_input_channel_req: channel 0 rtype exit-status reply 0
> debug1: channel 0: rcvd eof
> debug1: channel 0: output open -> drain
> debug1: channel 0: obuf empty
> debug1: channel 0: close_write
> debug1: channel 0: output drain -> closed
> debug1: channel 0: rcvd close
> debug1: channel 0: close_read
> debug1: channel 0: input open -> closed
> debug1: channel 0: almost dead
> debug1: channel 0: gc: notify user
> debug1: channel 0: gc: user detached
> debug1: channel 0: send close
> debug1: channel 0: is dead
> debug1: channel 0: garbage collecting
> debug1: channel_free: channel 0: client-session, nchannels 1
> debug1: fd 1 clearing O_NONBLOCK
> Connection to 195.251.7.252 closed.
> debug1: Transferred: stdin 0, stdout 0, stderr 37 bytes in 3.9 seconds
> debug1: Bytes per second: stdin 0.0, stdout 0.0, stderr 9.5
> debug1: Exit status 0
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
