On Tue, Apr 01, 2003 at 03:34:58PM +0100, Dave Restall - System Administrator wrote:
> Hi,
>
> I'm having an irritating problem with Debian 3.0 on Intel. I'm using
> olvwm on top of XFree86 Version 4.1.0.1. (it is over 12 months old).
> Hardware is on board Trident Microsystems CyberBlade/i1 (rev 0).
>
> Machine runs fine, just a standard install, nothing special. However
> from time to time (and I suspect it's xscreensaver related) I am unable
> to move the mouse cursor to the far left of the screen (about 5%), I can
> move it to the far right, in fact it goes off the edge of the visible
> area. Top to bottom is all fine. I have tried resetting olvwm from
> inside the system but the only certain way to cure the problem is to
> close X _AND_ reset the box. If you don't reset, the problem is still
> apparent when you reload olvwm. I have worked through the problem,
> simply by moving the mouse cursor to the right of what I want to select
> and clicking. If I am lucky and manage to catch the keyboard/mouse at
> the right time (I think this is when xscreensaver is just about to start
> a new sequence) then the cursor reverts back to its normal operation.
>
> The best way I can think of the problem is that the 'virtual' screen has
> been offset to the right of the physical screen by about 5%. Everything
> else remains the same, none of the applications move.
>
> Has anybody else seen this ? I've stfw and can't find anything.
> Unfortunately, the problem is not easily repeatable.
Used to have this myself.
Solution seems (in that doing this solved it AFAICS) to be putting the
SWCursor line in your X config file.
Here's my compete section -
Section "Device"
Identifier "Trident Cyberblade 7i"
Driver "trident"
Option "SWCursor" "on"
EndSection
HTH,
jc
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
