my epson perfection 1650 scanner was recognized and working under the
"woody upgrade from potato" system that i abandoned last week. (i then
got a very recent woody iso and spent the hours upgrading to very
current)... it's much smoother and forgiving on the installs.
now this again:
Linux version 2.2.20 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Mon Dec
31 07:05:08 EST 2001
...
hub.c: USB new device connect on bus1/2, assigned device number 2
usb.c: USB new device connect, assigned device number 2
usb.c: USB device 2 (vend/prod 0x4b8/0x110) is not claimed by any active
driver.
... last line is the only symptom
my unchanged /etc/modules:
unix
af_packet
3c59x
uhci
options scanner vendot=0x04B8 product=0x0110
es1371
agpgart
and /proc/bus/usb/devices:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=04b8 ProdID=0110 Rev= 1.10
S: Manufacturer=EPSON
S: Product=EPSON Scanner
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
and yes i modified /etc/sane.d/epson.conf to reflect the usb scanner.
my copier has both feet in the grave. the whole scanner project was to
replace it so i can fill the grave. i left r/h because of the above...
thanks
dave
--
Dave Mallery, K5EN (r/h 7.2 krud; debian woody)
PO Box 520
Ramah, NM 87321
no gates .~.
no windows... /V\
/( )\
running GNU/Linux ^^-^^ (Linux TM Linus Torvalds)
free at last!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
