The important parts for making the wheel work are Option "Emulate3Buttons" "off" Option "ZAxisMapping" "4 5"
Every thing else should stay to match your physical device. I set mine up on the first try after following the advice at http://www.koala.ilog.fr/ (boy was I surprised!) make sure you're using startx as root. then you can capture the server messages and find out where it chokes. Bob Quoting Daniel Toffetti <[EMAIL PROTECTED]>: > Hi ! > > I've searched through the archives looking for the correct > configuration of a three wheel mouse (in my case, it's a Genius Optical > > NetScroll+ Eye PS/2) > > This is what I currently have (working well except for the wheel): > > Section "InputDevice" > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "Microsoft" > Option "Device" "/dev/mouse" > Option "Emulate3Buttons" > EndSection > > And this is what I've found in an old post in the archives: > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/psaux" > Option "Emulate3Buttons" "off" > Option "ZAxisMapping" "4 5" > Option "CorePointer" > EndSection > > Of course I've changed the entry in ServerLayout from Mouse1 to Mouse0 > > when I tried the new config. The X server crashes and dumps me to the > console. I've tried also changing "device" in the suggested config from > > /dev/psaux back to /dev/mouse as I have it working now, but to no > avail. > > Any clues ? Thanks in advance ! > > -- > Daniel Toffetti --- 'There is no spoon...' - The Matrix > > Running the bleeding edge Debian Sid version 3.0 > Linux luni 2.4.13 #1 SMP Sun Oct 28 18:30:53 ART 2001 i686 unknown > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > >
