steve downes wrote: > > Tried the -v option & all seemd OK. (listed below) It seems to be > allowing X. > > However it still isn't functioning. > > Sorry for the delay, I decided it might be policy to upgrade the > server to Woody before carrying on but the only difference in this > context is the error message now no longer says error 101 > > Is it something else altogether? > > Steve > > debug1: Applying options for * > debug1: Seeding random number generator > debug1: Rhosts Authentication disabled, originating port will not be trusted. > debug1: restore_uid > debug1: ssh_connect: getuid 1000 geteuid 0 anon 1 > debug1: Connecting to gateway [192.168.0.9] port 22. > debug1: temporarily_use_uid: 1000/1000 (e=0) > debug1: restore_uid > debug1: temporarily_use_uid: 1000/1000 (e=0) > debug1: restore_uid > debug1: Connection established. > debug1: read PEM private key done: type DSA > debug1: read PEM private key done: type RSA > debug1: identity file /home/steve/.ssh/id_rsa type -1 > debug1: identity file /home/steve/.ssh/id_dsa type -1 > debug1: Remote protocol version 2.0, remote software version OpenSSH_3.0.2p1 > Debian 1:3.0.2p1-6 > debug1: match: OpenSSH_3.0.2p1 Debian 1:3.0.2p1-6 pat ^OpenSSH > Enabling compatibility mode for protocol 2.0 > debug1: Local version string SSH-2.0-OpenSSH_3.0.2p1 Debian 1:3.0.2p1-6 > debug1: SSH2_MSG_KEXINIT sent > debug1: SSH2_MSG_KEXINIT received > debug1: kex: server->client aes128-cbc hmac-md5 none > debug1: kex: client->server aes128-cbc hmac-md5 none > debug1: SSH2_MSG_KEX_DH_GEX_REQUEST sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP > debug1: dh_gen_key: priv key bits set: 121/256 > debug1: bits set: 1614/3191 > debug1: SSH2_MSG_KEX_DH_GEX_INIT sent > debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY > debug1: Host 'gateway' is known and matches the RSA host key. > debug1: Found key in /home/steve/.ssh/known_hosts:3 > debug1: bits set: 1566/3191 > debug1: ssh_rsa_verify: signature correct > debug1: kex_derive_keys > debug1: newkeys: mode 1 > debug1: SSH2_MSG_NEWKEYS sent > debug1: waiting for SSH2_MSG_NEWKEYS > debug1: newkeys: mode 0 > debug1: SSH2_MSG_NEWKEYS received > debug1: done: ssh_kex2. > debug1: send SSH2_MSG_SERVICE_REQUEST > debug1: service_accept: ssh-userauth > debug1: got SSH2_MSG_SERVICE_ACCEPT > debug1: authentications that can continue: > publickey,password,keyboard-interactive > debug1: next auth method to try is publickey > debug1: try privkey: /home/steve/.ssh/id_rsa > debug1: try privkey: /home/steve/.ssh/id_dsa > debug1: next auth method to try is keyboard-interactive > Password: > debug1: packet_send2: adding 32 (len 20 padlen 12 extra_pad 64) > debug1: ssh-userauth2 successful: method keyboard-interactive > debug1: channel 0: new [client-session] > debug1: send channel open 0 > debug1: Entering interactive session. > debug1: ssh_session2_setup: id 0 > debug1: Requesting X11 forwarding with authentication spoofing. > debug1: Requesting authentication agent forwarding. > debug1: channel request 0: shell > debug1: channel 0: open confirm rwindow 0 rmax 16384 > Last login: Mon Mar 4 20:26:57 2002 from > rm.kingswayelec.co.uk.0.168.192.in-addr.arpa on pts/1 > Linux gateway 2.2.19pre17 #1 Tue Mar 13 22:37:59 EST 2001 i586 unknown > You have mail. > Last login: Tue Mar 5 08:32:53 2002 from > rm.kingswayelec.co.uk.0.168.192.in-addr.arpa > [EMAIL PROTECTED]:~$ xterm -v > XFree86 4.1.0(165) > [EMAIL PROTECTED]:~$ xterm > xterm Xt error: Can't open display: > [EMAIL PROTECTED]:~$ vncviewer > Error: Can't open display: > [EMAIL PROTECTED]:~$
My 2 bits worth of experience: [EMAIL PROTECTED]:~$ ssh -v -X pinky SSH Version OpenSSH-1.2.3, protocol version 1.5. Compiled with SSL. debug: Reading configuration data /etc/ssh/ssh_config debug: Applying options for * debug: ssh_connect: getuid 1000 geteuid 0 anon 0 debug: Connecting to pinky.its.adelaide.edu.au [129.127.46.188] port 22. debug: Allocated local port 776. debug: Connection established. debug: Remote protocol version 1.5, remote software version OpenSSH-1.2.3 debug: Waiting for server public key. debug: Received server public key (768 bits) and host key (1024 bits). debug: Host 'pinky.its.adelaide.edu.au' is known and matches the host key. debug: Encryption type: 3des debug: Sent encrypted session key. debug: Installing crc compensation attack detector. debug: Received encrypted confirmation. debug: RSA authentication using agent refused. debug: Doing password authentication. [EMAIL PROTECTED]'s password: debug: Requesting pty. debug: Requesting X11 forwarding with authentication spoofing. debug: Requesting shell. debug: Entering interactive session. Last login: Wed Mar 6 10:07:50 2002 from jmelhuish.its.adelaide.edu.au on pts/1 Linux pinky 2.4.18 #3 Fri Mar 1 09:43:07 CST 2002 i686 unknown No mail. [EMAIL PROTECTED]:~$ xterm xterm Xt error: Can't open display: [EMAIL PROTECTED]:~$ export DISPLAY=jmelhuish:0.0 [EMAIL PROTECTED]:~$ xterm debug: Received X11 open request. debug: channel 0: new [X11 connection from pinky.its.adelaide.edu.au port 32981] debug: channel 0: OUTPUT_OPEN -> OUTPUT_WAIT_DRAIN [rvcd IEOF] debug: channel 0: OUTPUT_WAIT_DRAIN -> OUTPUT_CLOSED [obuf empty, send OCLOSE] debug: channel 0: shutdown_write [EMAIL PROTECTED]:~$ debug: channel 0: INPUT_OPEN -> INPUT_WAIT_DRAIN [read failed] debug: channel 0: shutdown_read debug: channel 0: INPUT_WAIT_DRAIN -> INPUT_WAIT_OCLOSE [inbuf empty, send IEOF] debug: channel 0: INPUT_WAIT_OCLOSE -> INPUT_CLOSED [rcvd OCLOSE] debug: channel 0: full closed [EMAIL PROTECTED]:~$ ie. it worked once I exported DISPLAY. Tom
