High, On Mon, 25 Feb 2002, Eric Richardson wrote:
> Hi, > > I'm trying to get a second identical network card to work and need some > assistance. The card is a AMD PCnet-ISA+ (a pnp card) that uses the > lance.o module. When installing I was able to get one card working by > adding io=0x300. The module assigns IRQ 3 and DMA 5 when loaded. I am > using DHCP to get an IP address for eth0. I also tried both cards > individually so I know both cards work. Here is what I tried so far. > > Edit the file modules.conf and added 0x320 to the previous configuration > so it looks like this. > lance.o io=0x300,0x320 > Upon reboot this hung when networking tried to start. > Use modconf in stead of modifying modules.conf itself. > I don't know if I have to reset the setting on the card so one card will > look for 0x320 or what but found something on the web to that effect. > What software would I use for this or is there some other approach? > Are you sure both cards have a different, free IRQ? If not, you should try to get a configuration disk for your networkcard from the internet, or try to set PnP-OS installed to No in your BIOS. Greetz, Sebastiaan
