ji ya dimi
>
> There are motherboards with hardware ATA-100 RAID controllers,
> these would give you the best bang per buck (if the controller
> is well supported by the kernel): cheap IDE drives + high
> performance of RAID.
none of those onboard raid stuff works ...
http://www.linux-ide.org/chipsets.html
true test is...
- install your root-raid setup....
- reboot make sure it normally all works .. than test "raid0/1"
- power down and disconnect hda
- power up and if hw raid isn't working, its dead...
- do the same with the other disk
if its "truely" hardware raid0/1... disconnecting a drive
should still boot the system in degraded raid mode
c ya
alvin
http://www.1U-Raid5.net ...
