OK, I'm wondering if the problem has to do with changes i made to /etc/default/pcmcia, based on advice from this forum. Currently, PCIC=yenta_socket (I am using woody!). I'm now thinking it should be xircom_cb. Can anyone confirm this?
On Thursday 21 February 2002 11:36 am, Curtis Vaughan wrote: > OH! I've discovered the following. > ifconfig lo > shows that lo has no IP address!!!!! > > On Thursday 21 February 2002 11:12 am, Curtis Vaughan wrote: > > Rebooted. Same results. Included below are changes I made to the > > network.opts file. Also, should I reenter eth0 in my interfaces file in > > the line: > > > > auto lo > > > > IPADDR="10.0.0.33" > > NETMASK="255.255.255.0" > > NETWORK="10.0.0.0" > > BROADCAST="10.0.0.255" > > # Gateway address for static routing > > GATEWAY="10.0.0.254" > > > > The DHCP entry is set to "n". > > > > Curtis > > > > PS. BTW, I don't know where the question marks came from. > > > > On Thursday 21 February 2002 10:47 am, Curtis Vaughan wrote: > > > Thanks to Nathan for the advise. I have edited the network.opts file > > > the way I think it should be. Besides the information provided within > > > the network.opts file itself, whereas can I find info for editing it? > > > There is no man entry. > > > > > > After I reboot I will report as to the results.
