I just did apt-get install cdrecord. I have an all-SCSI system, so my SCSI driver is compiled into the kernel. Following is the problem I'm experiencing:
[EMAIL PROTECTED]:/etc# cdrecord -scanbus Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling cdrecord: No such file or directory. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root. My /etc/cdrecord.conf is: CDR_DEVICE=plextor # # The following definitions allow abstract device names. # They are used if the device name does not contain the # the characters ',', ':', '/' and '@' # # drive name device speed fifosize driveropts # plextor= 0,4,0 12 -1 "" /dev/cdrom is a symbolic link to /dev/sr0, which is assigned to the Plextor at start-up: [EMAIL PROTECTED]:/etc# dmesg | grep CD Vendor: PLEXTOR Model: CD-R PX-W124TS Rev: 1.05 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0 Uniform CD-ROM driver Revision: 3.12 /dev/sr0 is a symbolic link to /dev/scd0. /dev/scd0 appears as follows: [EMAIL PROTECTED]:/etc# ls -al /dev/scd0 crw-r--r-- 1 root root 21, 0 Dec 13 19:54 /dev/scd0 Any thoughts or ideas would be appreciated. Thanks! -- ____) ,_) ,_) (-(__ |_ _ _ |/ ____) | |(_)(_ |\ ( \_, _______________________________________________ | http://www.exitwound.org : hard to find | _______________________________________________ | "Arguments with furniture are rarely | | productive." -- Kehlog Albran, "The Profit" | _______________________________________________ -------------BEGIN GEEK CODE BLOCK------------- | Version: 3.1 | | GJ/IT d- s: a C+++>$ UL++++ P+++ L+++ E--- W++| | N+@ o K- w O- M- V PS+ PE Y+ PGP++ t+@ 5@ X++ | | R tv+@ b+ DI++++ D+ G++ e++++ h---- r+++ y+++ | --------------END GEEK CODE BLOCK--------------
