surely you have some configuration that tells you computer that it should recognize an scsi drive. Run the computer BIOS set up, and set it to see ide drives with the configuration of your conner HD. If you have a board manual of that computer, read it too. SCSI drives are a diferent kind from ordinary IDE ( I assume your conner is an IDE as they are the most popular and cheaper ones). Cables are diferent too. You need special hardware to have SCSI drives ( SCSI controler or something ).
regards J.A.Serralheiro On Thu, 6 Dec 2001, esteban alcaraz wrote: > hello mr. > I have a ncr system 3350 486 dx2 66 mhz, computer with, a hard disk of 212 > megas, conner, cp 30200. > when i start it shows the next message: > NO SCSI DEVICE DETECTED SLOT 5. > i have already checked two jumpers from hard disk and i also checked the > connectors for the hard disk but i found nothing. > i changed the hard disk for a quantum lps 105s and it shows the same > message before mentioned it. > > i want that the computer recognizes the hard disk, how can i do? > thank you very much. > any information will be a great help for me. > > atte: > > andres > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
