You need to use scsi emulation to enable cdwritind. cdrecord -scanbus scans the scsi bus. See the CDWriting HOWTO. -jackp
--- Conrad Newton <[EMAIL PROTECTED]> wrote: > I have been trying to set things up with a DVD on hdc and > > a CD-burner on hdd using modules, but without success. > > I am using Debian/unstable with kernel 2.4.20 configured > in > the same way as the Debian package > kernel-image-2.4.20-686, > that is with a highly modular kernel. I am willing to > believe that things might work more easily if I compiled > in support for the DVD and CD-burners, but for the > present > I am stubborn and would like to make it work with > modules. > > Although the DVD-drive works as expected, the CD-burner > does not work properly. For example, > > [EMAIL PROTECTED]:~$ su > Password: > viszla:/home/conrad# cdrecord -scanbus > Cdrecord 2.01a04 (i686-pc-linux-gnu) Copyright (C) > 1995-2002 Jörg Schilling > cdrecord: No such file or directory. Cannot open > '/dev/pg*'. Cannot open SCSI driver. > cdrecord: For possible targets try 'cdrecord -scanbus'. > Make sure you are root. > cdrecord: For possible transport specifiers try 'cdrecord > dev=help'. > cdrecord: Also make sure that you have loaded the sg > driver and the driver for > cdrecord: SCSI hardware, eg. ide-scsi if you run > IDE/ATAPI drives over > cdrecord: ide-scsi emulation. Read > /usr/share/doc/cdrecord/README.ATAPI.setup! > > ------------------------------------------- > My modules: > > Module Size Used by Not tainted > sg 33132 0 (unused) > ide-scsi 8848 0 > ide-cd 30596 0 > cdrom 29600 0 [ide-cd] > scsi_mod 94804 2 [sg ide-scsi] > reiserfs 182544 2 (autoclean) > isofs 26548 0 (autoclean) > vfat 10860 0 (autoclean) > fat 32760 0 (autoclean) [vfat] > ext2 35616 0 (autoclean) > ext3 65408 0 (autoclean) > jbd 42368 0 (autoclean) [ext3] > ide-disk 12704 3 (autoclean) > ide-probe-mod 9808 0 (autoclean) > ide-mod 173608 3 (autoclean) [ide-scsi > ide-cd ide-disk ide-probe-mod] > > -------------------------------------------- > Boot messages: > > Kernel command line: root=/dev/hda6 hdd=ide-scsi > ignore=hdd > -- > SIS5513: IDE controller on PCI bus 00 dev 15 > SIS5513: chipset revision 208 > SIS5513: not 100% native mode: will probe irqs later > SiS5513 > ide0: BM-DMA at 0xff00-0xff07, BIOS settings: > hda:DMA, hdb:DMA > ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: > hdc:DMA, hdd:DMA > hda: ST380021A, ATA DISK drive > hdc: SAMSUNG DVD-ROM SD-616T, ATAPI CD/DVD-ROM drive > hdd: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > hda: 156301488 sectors (80026 MB) w/2048KiB Cache, > CHS=155061/16/63 > Partition check: > /dev/ide/host0/bus0/target0/lun0: [PTBL] [9729/255/63] > p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 > > Journalled Block Device driver loaded > VFS: Can't find ext3 filesystem on dev ide0(3,6). > VFS: Can't find ext2 filesystem on dev ide0(3,6). > FAT: bogus logical sector size 0 > VFS: Can't find a valid FAT filesystem on dev 03:06. > Unable to identify CD-ROM format. > reiserfs: checking transaction log (device 03:06) ... > Using r5 hash to sort names > ReiserFS version 3.6.25 > Adding Swap: 2048248k swap-space (priority -1) > Real Time Clock Driver v1.10e > SCSI subsystem driver Revision: 1.00 > hdc: ATAPI 48X DVD-ROM drive, 512kB Cache > Uniform CD-ROM driver Revision: 3.12 > hdd: ATAPI 48X CD-ROM CD-R/RW drive, 1984kB Cache > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > > > -- > To UNSUBSCRIBE, email to > [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > __________________________________________________ Do you Yahoo!? Yahoo! Web Hosting - establish your business online http://webhosting.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
