On Wed, 21 Nov 2001 10:44:19 -0500 dman <[EMAIL PROTECTED]> wrote: > On Wed, Nov 21, 2001 at 08:13:53AM +0100, Eric Smith wrote: > | According to dman on Tue, Nov 20, 2001 at 08:14:49PM -0500: > | > On Tue, Nov 20, 2001 at 07:10:19PM +0100, Eric Smith wrote: > | > | Its been quite a saga - I have lost my (limited) hacking instinct. > | > | Having failed to get ipmasq to work on 2.2.19 (possibly something to > | > | do with eth0 eth1 being reversed i.e. eth0 on LAN side), I am now on > | > | the 2.4.14 precompiled and hoping for better things. > | > > | > You can specify the address for each card on the kernel command line, > | only if you compile the drivers into the kernel > > I wasn't aware of that. In that case, it is probable that the address > can be specified in /etc/modules or something in /etc/modutils. > > | > or just switch the cables on the back of your box. > | the cable company locks in on the MAC address :(
No, no, no, is really incorrect. Ethernet driver arguments (including which card is eth0 and eth1) can be given when modules are loaded or at boot time see the Ethernet HOWTO sections 9.1 and 9.2 to see how. Also, I can't for the life of me see why a cable company would lock on to a MAC address. Roadrunner doesn't do this, and it would be really incompetent for a cable company to authenticate on the ethernet card's MAC, as MACs are easily changed and I don't think that anything but the cable modem actually knows your ethernet card's MAC. They probably do authenticate based on the cable modem's MAC, but you probably couldn't change that even if you wanted to.
