Hello all,
I have a very strange problem i nevr have had: i build a new computer
from scratch and installed woody.
The funny problem is that linux detects all cards but cannot use'em cos
they are assigned to interupt zero. Thus lspci and modprobe works onn
all cards in the pci slots but the BIOS istself cannot detect them.
the agp device, onboard sound, ide controller, serial controller etc are
listet on system startup (BIOS) and linux detects'em, but i cannot get
any card working cos it receives irq0.
Has anyone an idea? i tried to manually assign irqs to the approproate
slots, but that also does not work. /proc/interrupts does also not list
the devices.
the system:
Athlon 1000C Thunderbird
ASUS A7 Board with VIA KT-133 Chipset plus onboard RAID controller
BIOS: actual Award
nVidia GeForce2 MX400 w/ 64megs
512MB RAM 133
Thus, the only device correctly deteced is the AGP card (via the PCI
bus, right?). Any other cards aren't detected. For your info: i tried
everything with minimal configuration, means with only one PCI card to
avoid eventual incompats between any PCI device.
Would very appreciate ANY help, thank you,
Timo
