Dmitriy Kropivnitskiy wrote:
>
> I have just upgraded my box ( unstable about 3-4 months berhind on the
> updates ). The upgrade was from PII 233 BX chipset motherboard to Athlon
> 1800+ XP VIA KT266A motherboard. The problem seems to be the following:
>
> 1. I cannot boot off the hard drive. It will see all the partitions and
> system will work fine once booted from floppy/CDROM. It will install and
> reinstall LILO without any problems. But every time I try to boot off of HD I
> get there is not boot device insert bootable disk and press enter or
> something. If anyone has any suggestions I would truly appreciate.
first the obvious: check bios settings,
now just slightly less obvious: make sure lilo is installed on mbr
(at least I think that's where it needs to be, check the docs for lilo)
> 2. What driver should I use for the sound card?
what soundcard do you have? Is it the onboard one? ac97 or something
like that is often found on via motherboards, there's a driver for that
chipset for linux (at least alsa), but the sound quality is quite poor
(at least that's my observation and also confirmed by other people on
this list)
erik
