Hello there,
I have got KinetiZ7L m/board w/ VIA Apollo c/set (VT8361)
and I cannot set svga 3.3.6 for higher freq. than 70Hz though my Hyundai
V770 is 1024x768 @ 85Hz capable. Inbuilt agp gets recognised as Trident
CyberBlade/i1, luckily, there does not seem be any via support yet.
Best results I can make are..
1024x768 70Hz 56,5 Khz .. good
800x600 56Hz 35,15Khz .. flickers
640x480 60Hz 31,5 Khz .. flickers
Even when I pick mode lines with higher freq. I either get out of sync
or I end up around 60Hz.
Any ideas? Thanx in advance. BTW what is the status of VIA agp support
in potato, config-2.2.19pre17 says..
CONFIG_AGP=m
CONFIG_AGP_VIA=y
x.out follows..
XFree86 Version 3.3.6 / X Window System
(protocol Version 11, revision 0, vendor release 6300)
Release Date: January 8 2000
If the server is older than 6-12 months, or if your card is
newer
than the above date, look for a newer version before reporting
problems. (see http://www.XFree86.Org/FAQ)
Operating System: Linux 2.2.14-va.4.4-i586 i686 [ELF]
Configured drivers:
SVGA: server for SVGA graphics adaptors (Patchlevel 1):
just pertaining lines..
tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000,
tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420,
tgui9420dgi,
tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682,
tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520,
cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d,
cyberblade,
(using VT number 7)
XF86Config: /usr/X11R6/lib/X11/XF86Config
(**) stands for supplied, (--) stands for probed/default values
(**) XKB: keymap: "xfree86(us)" (overrides other XKB settings)
(**) Mouse: type: PS/2, device: /dev/psaux, buttons: 3
(**) SVGA: Graphics device ID: "CyberBlade"
(**) SVGA: Monitor ID: "V770"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/:unscaled,/usr/X11R6/
ib/X11
/fonts/cyrillic/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/
11R6/l
ib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/
ib/X11
/fonts/Type1/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/cyr
llic/,
/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/75dpi/"
(--) SVGA: PCI: Trident CyberBlade/i1 rev 0, Memory @ 0xd5800000,
0xd6000000
(--) Trident chipset version: 0xf3 (CyberBlade/i1)
(--) SVGA: Detected an TFT 1024x768 Display
(--) SVGA: Revision 106.
(--) SVGA: Using Trident programmable clocks
(--) SVGA: chipset: cyberblade
(--) SVGA: videoram: 2048k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 230.000 MHz
(**) SVGA: Mode "1024x768": mode clock = 75.000
(**) SVGA: Mode "800x600": mode clock = 36.000
(**) SVGA: Mode "640x480": mode clock = 25.175
(--) SVGA: Virtual resolution set to 1024x768
(--) SVGA: Using Linear Frame Buffer at 0x0d5800000, Size 2MB
System: `/usr/X11R6/lib/X11/xkb/xkbcomp -w 1 -R/usr/X11R6/lib/X11/xkb
-xkm -m us
-em1 "The XKEYBOARD keymap compiler (xkbcomp) reports:" -emp "> " -eml
"Errors
from xkbcomp are not fatal to the X server" keymap/xfree86
compiled/xfree86.xkm'
waiting for X server to shut down
Thomas Kral
