----- Original Message ----- From: Dimitri Maziuk <[EMAIL PROTECTED]> To: <debian-user@lists.debian.org> Sent: Sunday, October 07, 2001 21:19 Acasica Subject: Re: My modem..and logs..
> * Petre Daniel ([EMAIL PROTECTED]) spake thusly: > > > > okeyah.i looked in windows with sisoft and i discovered that it is on com3 > > ,it uses irq5 and i/o 0110-0117 > > here are /var/log/messages and /var/log/syslog attached.i'm booting into deb > > now to recheck things..thx a lot > > ... > > i tried irq5 and commented out in /etc/isapnp.conf and rebooted > > pppconf still doesn't sees it and wvdial says something about a i/o error > > what next? > > I suggest you reset your modem to use a standard com port and disable > that port in bios -- unless of course you are using both com ports. > Better still, get an external modem from e.g. eBay. > > Dima > -- > Q276304 - Error Message: Your Password Must Be at Least 18770 Characters > and Cannot Repeat Any of Your Previous 30689 Passwords -- RISKS 21.37 > Dima,John and Eric, i can't buy an external modem.i really can't.I was at work all day and couldn't reply to your replies ;-) I disabled those 2 uart thingies from bios,rebooted then run ppdump > /etc/isapn.conf edited,rebooted,run pppconfig again.. exited..nothing.. tried wvdial then wvdialconf...bleah.. i atached some files which may bring some light over this case.. I know i can be very annoying sometimes,but the truth it's that i really want to dial-up from debian rather than using this damn ooootlook :-> Thx, Dani.
interrupts
Description: Binary data
ioports
Description: Binary data
wvdial
Description: Binary data
wvdialconf
Description: Binary data
