Sven Garbade([EMAIL PROTECTED]) is reported to have said:
> Hi all,
>
> I've calculated a modeline 1024x768x16 with a refresh rate at 100Hz, but
> don't know where to put it in XF86Config-4. I've got only a standard
> VESA Mode (1280x1024 or so at 86Hz). Some parts of my config file:
>
> Section "Monitor"
> Identifier "F520"
> HorizSync 30-70
> VertRefresh 50-160
> # Option "DPMS"
> ModeLine "1024x768" 113.76 1024 1072 1312 1408 768 770
> 782 808 #100Hz
> EndSection
Sven
I had a problem getting X-4 working with the modelines from X-3
until I changed them to the new format (man XF86Config). Below are
the relevant section that worked, after reading the man page.
-- XF86Config-4---
Section "Monitor"
Identifier "Monitor0"
VendorName "Sylvania"
ModelName "F77"
DisplaySize 315 241
HorizSync 30-70
VertRefresh 50-160
Mode "640x480"
DotClock 45.88
HTimings 640 688 784 852
VTimings 480 488 494 530
Flags "-HSync" "-VSync"
EndMode
Mode "800x600"
DotClock 69.65
HTimings 800 864 928 1104
VTimings 600 604 610 640
Flags "-HSync" "-VSync"
Endmode
Mode "1024x768"
DotClock 85.00
HTimings 1024 1080 1200 1368
VTimings 768 776 779 823
EndMode
Mode "1280x1024"
DotClock 108.00
HTimings 1280 1336 1448 1688
VTimings 1024 1025 1028 1066
Endmode
EndSection
:-) HTH, YMMV, HAND :-)
--
Micro Credo:
Never trust a computer bigger than you can lift.
_______________________________________________________
