On 2001.09.06 13:26 Martin F Krafft wrote: > hi folks, > i use isdnlog 3.1pre1b-7.bunk with a 2.4.9 kernel on a machine that > has a AVM FritzCard! (A1), which works just fine with the hisax > driver. However, isdnlog seems not to detect *anything*. even if i run > it from the command line with 0xffff debug level, it reports > absolutely zero. which i kind of understand because /dev/isdnctrl0 and > /dev/isdninfo do not give any information.
I have the same isdn card. Also the new kernel (2.4.8) and isdnlog don't work. I think this is a bug. Or does anyone else fixed this whithout modyfining the isdnutils sources? See this: isdnlog Version 3.00 loaded (ISDN subsystem with ISDN_MAX_CHANNELS > 16 detected - 2 active channels, 3 MSN/SI entries) (Data versions: iprofd=0x05 net_cfg=0x05 /dev/isdninfo=0x01) (HiSax driver detected) . . # following the log entries of connections This is that what was written into my /var/log/isdn/isdnlog while using kernel 2.2.x. Since i use kernel 2.4.0 till 2.4.8 this will be written into my isdnlog file: isdnlog Version 3.00 loaded (ISDN subsystem with ISDN_MAX_CHANNELS > 16 detected - 2 active channels, 3 MSN/SI entries) (Data versions: iprofd=0x06 net_cfg=0x06 /dev/isdninfo=0x01) isdn_net_ioctl_cfg version mismatch (kernel 0x06, isdnlog 0x05) exit now 99 # on this point isdnlog will be terminated (bad thing) Note this: isdn_net_ioctl_cfg version mismatch (kernel 0x06, isdnlog 0x05) I think isdnlog must be adjust for using whith kernel 2.4.x. If i used isdnlog 3.1 i had the same messages in my isdnlog file. If you like, you can write this to the maintainer of isdnutils: [EMAIL PROTECTED] Timo
