Not sure what your particular problem is, but I haven't had luck getting my wireless pcmcia (D-Link 650) working with anything later than 2.4.6. You might try going back to that rev.
-Tupshin ----- Original Message ----- From: "Steve Witt" <[EMAIL PROTECTED]> To: <debian-user@lists.debian.org> Sent: Saturday, August 18, 2001 6:18 PM Subject: Compiling pcmcia source w/ 2.4.x kernel > I'm trying to setup a wireless LAN system on a system running Debian > testing, and am compiling the 2.4.7 kernel sources (which I can do fine). > I'm also trying to compile the pcmcia sources and am running in to a > problem. I'm using the kernel-package mechanism of compiling the kernel > and pcmcia sources and during the pcmcia source compile I get the > following compile error: > > cc -MD -O3 -Wall -Wstrict-prototypes -pipe -I../include > -I/usr/src/kernel-source-2.4.7/include -D__KERNEL__ -DMODULE -c > apa1480_stub.c > apa1480_stub.c:53: ../drivers/scsi/aic7xxx.h: No such file or directory > apa1480_stub.c:79: `AIC7XXX' undeclared here (not in a function) > make[4]: *** [apa1480_stub.o] Error 1 > make[4]: Leaving directory `/usr/src/modules/pcmcia-cs/clients' > make[3]: *** [all] Error 2 > make[3]: Leaving directory `/usr/src/modules/pcmcia-cs' > make[2]: *** [build-modules] Error 2 > make[2]: Leaving directory `/usr/src/modules/pcmcia-cs' > make[1]: *** [kdist_image] Error 2 > make[1]: Leaving directory `/usr/src/modules/pcmcia-cs' > Module /usr/src/modules/pcmcia-cs failed. > > > Looking at the 2.2 kernel sources, the file 'aic7xxx.h' is in the > 'drivers/scsi/' directory as expected by 'apa1480_stub.c', but there is no > such file in the 2.4 kernel source. There is a aic7xxx.h in > 'kernel-source-2.4.7/drivers/scsi/aic7xxx', but it looks like a very > different file than in the 2.2 source. I've also done this with the 2.4.9 > kernel source that I downloaded directly. > > So, anyone compiled the pcmcia sources recently with a 2.4 kernel? > > Thanks... > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
