For one thing you just said you were running 2.4.6. The /lib/modules/2.4.7 is most likely not there.
Secondly: Your kernel is probably not set to accept module symbols from other compiled modules. This is actually something that you can solve in two ways I beleive. 1. Compile it yourself (safest, and you already did that). 2. Turn on the set module symbols for compiled modules and hope that the precompiled modules have the same (more of a shot in the dark). --mike On 09 Aug 2001 18:25:29 +0200, Stefan Baums wrote: > Hi all, > > I am having problems getting the PCMCIA code included in the 2.4 > kernels to work. If I compile it in as modules and then reboot to the > new kernel, I get the error message > > Starting PCMCIA services: modules/lib/modules/2.4.7/pcmcia/i82365.o: > init_module: No such device > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters > /lib/modules/2.4.7/pcmcia/ds.o: init_module: Operation not permitted > Hint: insmod errors can be caused by incorrect module parameters, > including invalid IO or IRQ parameters > cardmgr. > > If, however, I compile the separate pcmcia-source package for use with > the 2.4 kernel, everything works just fine. > > I'm running testing with kernel-source-2.4.6, and pcmcia-cs and > pcmcia-source 3.1.22-0.2potato. Does anybody know what's going on > here? > > TIA, > Stefan > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
