Hello: Well, the problem on why the system looks like running a 2.0.36 kernel because... it boots from 2.0.36 diskette :-( Apparently, the one who tried to install the 2.4.6 kernel could not make it run, and therefore putting a backup diskette inside.
Thus, it is a "LI" problem. On a similar case (where I have physical access to the system), I tried to upgrade from 2.1 to 2.2r2 on a system with SCSI/IDE mix. The LILO complained that the system has an old BIOS. I managed to fix it by not putting anything at the primary IDE (/dev/hda). This time, I have no access to the system. Any clue on how to fix the LILO problem? Michael Heldebrant wrote: > Can you run find /dev -type l and then run an ls -al on anything that > looks like it's pointing at hda? > I can't remember how to get find to exec an ls -al on each file it finds > and -follow won't really work here I think to get the target of the link > AND please run ls -al /dev/ |grep 3, > and look for anything with major 3 and minor 0 which would be pointing > at hda without having the hda name necessarily. > > --mike > > On 08 Aug 2001 10:33:52 +0700, Rahmat M. Samik-Ibrahim wrote: > > Hello Karsten, > > > > I will rewrite the problem to avoid context confusion. > > > > First some background: My (prior) DNS server's disk went > > out of order, and it was moved to an "unused" backup server. > > I noticed that the "named" at that system crashed once in > > a while, and therefore I tried to find out about what > > was going on. Then, I failed to "dselect|upadate" and > > "apt-get". > > > > Problems: > > - how to fix the lilo problem? > > - which manual to read? > > - any other clue what to do? > > > > Good news: > > - I can reboot it, and I have full remote access to the > > system. > > - ssh/sshd is available > > - the named does not crash so often (about 1-2 times a week). > > > > Bad news: > > - the owner of that system is very busy. I have no idea > > on why the CD-ROM is on IDA primary/master. > > But I guess, that there was only a SCSI disk in the > > beginning; the two additional IDE disks have been added > > later. > > - the system is 10000 miles away; I have no idea how > > it looks like, or if the CD-ROM drive is still > > attached. > > - The system is "as is"; it was not me who compiled the kernel. > > The problem: apparently it is still running 2.0.36; > > thus lilo can not be updated? > > > > Files: > > --- message after running "dselect|update" -------------------- > > mount: the kernel does not recognize /dev/hda as a > > block device > > (may be `insmod driver'?) > > update available list script returned error status 1. > > > > --- sources.list ---------------------------------------------- > > deb http://http.us.debian.org/debian woody main contrib non-free > > deb http://non-us.debian.org/debian-non-US woody non-US/main non-US/contrib > > non-US/non-free > > > > --- fstab --------------------------------------------- > > /dev/sda1 / ext2 defaults,errors=remount-ro 0 1 > > /dev/sda6 none swap sw 0 0 > > proc /proc proc defaults 0 0 > > /dev/sda2 /usr ext2 defaults 0 2 > > /dev/sda5 /var ext2 defaults 0 2 > > /dev/sda7 /h1 ext2 defaults 0 2 > > /dev/hdc1 /b1 ext2 defaults 0 2 > > /dev/hdd1 /b2 ext2 defaults 0 2 > > > > ---- part of messages ---------------------------------------- > > kernel: Memory: 256440k/262144k available (1136k kernel code, 384k > > reserved, 4184k data) > > kernel: Linux version 2.0.36 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #2 > > Sun Feb 21 15:55:27 EST > > 1999 > > kernel: ide: i82371 PIIX (Triton) on PCI bus 0 function 57 > > kernel: ide0: BM-DMA at 0xffa0-0xffa7 > > kernel: ide1: BM-DMA at 0xffa8-0xffaf > > kernel: hdc: Maxtor 53073U6, 29311MB w/2048kB Cache, CHS=59554/16/63, UDMA > > kernel: hdd: Maxtor 53073U6, 29311MB w/2048kB Cache, CHS=59554/16/63, UDMA > > kernel: ide1 at 0x170-0x177,0x376 on irq 15 > > kernel: (scsi0) <Adaptec AHA-294X Ultra SCSI host adapter> found at PCI 16/0 > > kernel: Failed initialization of WD-7000 SCSI card! > > kernel: <Adaptec AHA-294X Ultra SCSI host adapter> > > kernel: Module inserted $Id: cdrom.c,v 0.8 1996/08/10 10:52:11 david Exp $ > > > > --- lilo.conf -------------------------------------- > > disk=/dev/sda > > bios=0x81 > > disk=/dev/hdc > > bios=0x80 > > boot = /dev/hdc > > root = /dev/sda1 > > compact > > delay = 5 > > vga = normal > > > > # (extra note: /vmlinuz is a symlink of /boot/vmlinuz-2.4.6) > > # (no error complain when running "lilo") > > # (is this a BIOS problem?) > > image = /vmlinuz > > label = linux > > read-only > > > > image = /boot/vmlinuz-2.0.36 > > label = 2036 > > read-only > > > > > > ----------------------------------------------------------- > > regards, -- Rahmat M. Samik-Ibrahim - VLSM-TJT - http://rms46.vlsm.org - AWAS IBRAHIM[tm] PALSU :^) Patent and Trade Mark Pending
