I have installed the package and run rescan-scsi-bus.sh:
Host adapter 1 (aic7xxx) found.
Host adapter 0 (gdth) found.
Scanning for device 0 0 0 0 ...
OLD: Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ICP Model: Host Drive #00 Rev:
Type: Direct-Access ANSI SCSI revision: 02
Scanning for device 0 0 1 0 ...
OLD: Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: ICP Model: Host Drive #01 Rev:
Type: Direct-Access ANSI SCSI revision: 02
0 new device(s) found.
0 device(s) removed.
It couldn't detect the tape drive connected to aic7xxx.Is there anything
else I can check?
Murat
-----Ursprüngliche Nachricht-----
Von: Frank Gevaerts [mailto:[EMAIL PROTECTED]
Gesendet: Donnerstag, 27. Februar 2003 12:45
An: [EMAIL PROTECTED]
Betreff: Re: Can debian detect a tape drive without rebooting?
On Thu, Feb 27, 2003 at 11:55:29AM +0100, Yildiz, Murat wrote:
>
>
>
> Hi,
> I have plugged a tape drive and want to use it without rebooting it.It is
> connected to an scsi controller (aic7xxx_old module).Kernel 2.4.19
> "mt -f /dev/st0 status" says : No such device
> If it is possible then how?
Try running /sbin/rescan-scsi-bus.sh from the scsitools package
Frank
>
> Murat
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact
[EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
