On Sun, Apr 08, 2001 at 01:23:58AM -0600, eric wrote:
> ktb wrote:
>
> > On Sat, Apr 07, 2001 at 04:40:13PM -0600, eric wrote:
> > <snip>
> >
> >> this is some lines after I run dmesg | less
> >>
> >> SCSI subsystem driver Revision: 1.00
> >> scsi0 : SCSI host adapter emulation for IDE ATAPI devices
> >> Vendor: TOSHIBA Model: DVD-ROM SD-R1002 Rev: 1034
> >> Type: CD-ROM ANSI SCSI revision: 02
> >> Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
> >> sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
> >> Uniform CD-ROM driver Revision: 3.12
> >>
> >> my cd is dvd-cd - cdr-cdrw combo on /dev/hda
> >>
> >
> > I haven't messed with burners much but it looks like you should be
> > pointing to /dev/sr0 instead of /dev/hda which is probably your hard
> > drive. I may be wrong as I don't really understand SCSI emulation which
> > I understand is used with IDE CD R/W drives. Anyway you said you could
> > burn with the drive but not mount the drive, if I remember correctly.
> > You could try mounting your cd-rom on /dev/sr0 if it works point the
> > link /dev/cdrom to it.
> > kent
> >
> Dear Kent:
>
> I tried your hint:
>
> lshih:~# mount -t iso9660 /dev/hda /dev/sr0
> mount: mount point /dev/sr0 is not a directory
>
> but it apparent not work
> certin need your help again
>
That should be -
mount -t iso9660 /dev/sr0 /cdrom
You mount the actual device /dev/sr0 on the directory /cdrom
you then change to the /cdrom directory and should be able to read the
contents of the cd.
You should have /cdrom but if you don't for some reason just create it.
You can actually mount it on any empty directory you create. By default
debian creates /cdrom
kent
--
From seeing and seeing the seeing has become so exhausted
First line of "The Panther" - R. M. Rilke
