Thank for your help. I've tried your command line and got still no output. Yesterday I've also upgraded to gs-aladdin 6.5 (I've rebuild the package from unstable) and still no output. I should have an interaction that I don't understand at all.
Christophe On lun, 26 mar 2001 20:40:43 Andrea Vettorello wrote: > christophe barbe wrote: > > > Hi, > > > > I'm trying to use pdq (a print spooler system) under potato. It uses > > ghostscript to convert postscript to printer format file. > > First I thought there was a problem with pdq but know I'm sure the problem > > comes from gs. > > I've tried a lot of command and the result is always the same : I obtain no > > output. > > I've tried gs and gs-aladin : same result. > > > > So the following command give me no output (and the output are redirected > > in th standard output) > > gs -sDEVICE=jpeg -sOutputFile=- test.ps > > > > The same command works pretty good on an other system (a RH one, boo ...). > > > > I think the redirection on the standard output with the above command is the > correct behavior, if you want to send it to the > printer connected to your parallel port you should use something like "gs -q > -dSAFER -dNOPAUSE -dBATCH -sDEVICE=jpeg > -sOutputFile=/dev/lp0 test.ps". (the important part is the OutputFile option) > > Hope this could hep. > > > Andrea > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- Christophe Barbé Software Engineer Lineo High Availability Group 42-46, rue Médéric 92110 Clichy - France phone (33).1.41.40.02.12 fax (33).1.41.40.02.01 www.lineo.com
