Glyn Millington wrote: > Mark, I have the same sound-card as you. You have sound support set up > in the kernel? There was, IIRC, a driver for that card under the > "experimental" part of the sound options.
I have added the user to the audio group and also trying doing everything as root. Still no work. I am not sure what option you are talking about above for the IIRC driver. What is this? Here is the only options I get under sound when I do a make menuconfig <M> Sound card support <M> C-Media PCI (CMI8338/8738) [ ] Enable legacy FM [ ] Enable legacy MPU-401 [ ] Enable joystick [*] CMI8738 based audio cards [ ] Enable PCTel modem interface for CMI8738 [ ] Inverse S/PDIF in for CMI8738 [ ] Enable S/PDIF loop for CMI8738 (2) Number of speakers 2, 4, 5, 6 < > Creative SBLive! (EMU10K1) < > Ensoniq AudioPCI (ES1370) < > Creative Ensoniq AudioPCI 97 (ES1371) < > ESS Technology Solo1 < > ESS Maestro, Maestro2, Maestro2E driver < > S3 SonicVibes < > Trident 4DWave DX/NX or SiS 7018 PCI Audio Core < > Support for Turtle Beach MultiSound Classic, Tahiti, Monterey < > Support for Turtle Beach MultiSound Pinnacle, Fiji < > VIA 82C686 Audio Codec <M> OSS sound modules [ ] Verbose initialisation [ ] Persistent DMA buffers < > AD1816(A) based cards (EXPERIMENTAL) < > Aztech Sound Galaxy (non-PnP) cards < > Adlib Cards < > ACI mixer (miroPCM12) < > Crystal CS4232 based (PnP) cards < > Ensoniq SoundScape support < > Gravis Ultrasound support < > Intel ICH audio support < > Loopback MIDI device support < > MediaTrix AudioTrix Pro support < > Microsoft Sound System support < > MPU-401 support (NOT for SB16) < > NM256AV/NM256ZX audio support < > OPTi MAD16 and/or Mozart based cards < > ProAudioSpectrum 16 support < > PSS (AD1848, ADSP-2115, ESC614) support < > SoftOSS software wave table engine < > 100% Sound Blaster compatibles (SB16/32/64, ESS, Jazz16) supp < > AWE32 synth < > Full support for Turtle Beach WaveFront (Tropez Plus, Tropez, < > Limited support for Turtle Beach Wave Front (Maui, Tropez) sy < > Yamaha FM synthesizer (YM3812/OPL-3) support < > Yamaha OPL3-SA1 audio controller < > Yamaha OPL3-SA2, SA3, and SAx based PnP cards < > 6850 UART support < > Gallant Audio Cards (SC-6000 and SC-6600 based) Which extra ones do I need to select? I am so glad to hear it is possible to get it to work. Sorry to post such a long post. Regards. Mark.
