I've never seen the errors you describe, but I do run 2.2.17 on a firewall/router with two NICs. I accomplish this by passing the arguments
ether=10,0x300,eth0 ether=3,0x280,eth1 to the kernel. -chris Steve Doerr <[EMAIL PROTECTED]> writes: > Hello. > I just rebuilt the 2.2.17 kernel for a firewall/router and got the > following errors with my NIC's. > > /var/log/debug - eth0 no IPv6 routers present > /var/log/dmesg - IP-Config: No network devices available > > lspci -vvb lists both cards and I added the appropriate "append=" line > to lilo.conf. > > I followed the firewall/ethernet howto's about building the kernel for > this as best I could (it has changed a little bit). The card support is > in the kernel and not a module. > > Does anyone have any ideas what I overlooked, or what might be wrong? > > Thanks for any input. > Steve > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
