On Fri, Mar 16, 2001 at 11:10:33AM -0600, John Foster wrote:
> Dave Sherohman wrote:
> > ide0 at 0x1f0-0x1f7 on irq 14
> ----------------------------------------
> This is your hard drive :-)
*sigh* Uh-huh. I knew that... Of course ide0 != eth0. Guess I was just a
little too desperate for info on eth0 and turned temporarily dyslexic or
something.
> send us the output from "dmesg"
Linux version 2.2.12 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #2 Thu Aug 26
11:46:26 PDT 1999
Detected 462825985 Hz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 462.03 BogoMIPS
Memory: 126376k/129664k available (1244k kernel code, 416k reserved, 1528k
data, 100k init)
CPU: Intel Celeron (Mendocino) stepping 05
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
PCI: PCI BIOS revision 2.10 entry at 0xfc0ce
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
RAM disk driver initialized: 16 RAM disks of 4096K size
loop: registered device at major 7
PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411
PCI_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: WDC WD43AA, ATA DISK drive
hdb: CD-ROM Drive/F5E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: WDC WD43AA, 4112MB w/2048kB Cache, CHS=524/255/63
hdb: ATAPI 56X CD-ROM drive, 128kB Cache
Uniform CDROM driver Revision: 2.55
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
NCR53c406a: no available ports found
Failed initialization of WD-7000 SCSI card!
megaraid: v1.04 (August 16, 1999)
scsi : 0 hosts.
scsi : detected total.
Partition check:
hda: hda1 hda2
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 100k freed
Adding Swap: 265064k swap-space (priority -1)
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
> for the onboard NIC that you will require. Such is the hardship of
> integrated systems.
Indeed. I bought one a couple years back and never intend to repeat the
mistake. (I knew it was a bad idea at the time, but the price was so
good...) This one was inherited when I started a new job.
--
Linux will do for applications what the Internet did for networks.
- IBM, "Peace, Love, and Linux"
Geek Code 3.1: GCS d? s+: a- C++ UL++$ P++>+++ L+++>++++ E- W--(++) N+ o+
!K w---$ O M- V? PS+ PE Y+ PGP t 5++ X+ R++ tv b+ DI++++ D G e* h+ r y+
