I have the MS optical Wheel mouse and i used imps/2 for the protocol... i
dont know for sure but i dont see it in mine... try commenting out the Option
Buttons 5.... if u have the 5 button mouse then i dont know what to do for
the extra buttons but here is what i have and it works fine
Section "InputDevice"
# Identifier and driver
Identifier "MS Optical"
Driver "mouse"
Option "Protocol" "imps/2"
Option "Device" "/dev/psaux"
# Option "Emulate3Buttons"
Option "ClearDTR"
Option "ClearRTS"
Option "ZAxisMapping" "4 5"
EndSection
Hope this helps
- overid3 =]
On Tuesday 13 March 2001 14:36, Bob Nielsen wrote:
> Try "ImPS/2" instead of imps/2. Case matters much of the time.
>
> Bob
>
> On Tue, Mar 13, 2001 at 02:28:48PM -0500, Richard Black wrote:
> > Hi all
> >
> > has any one successfully got a Microsoft Wheel Mouse to work? Whenever
> > I use the imps/2 protocol, my mouse doesn't work (ps/2 is fine, but the
> > wheel isn't recognised). I realize that some people have this problem
> > when they are running gpm, but this is not the case--I am not running
> > gpm.
> >
> > I was wondering, in particular, if there is any special kernel configs
> > needed to get imps/2 to work
> >
> > My set up is:
> >
> > a) no gpm
> > b) xfree 4.0.2-7
> > c) kernel 2.4.2
> >
> > In my XF86Config-4 file I have:
> >
> > Section "InputDevice"
> > Identifier "Generic Mouse"
> > Driver "mouse"
> > Option "CorePointer"
> > Option "Device" "/dev/psaux"
> > Option "Protocol" "imps/2"
> > #Option "Emulate3Buttons"
> > Option "Buttons" "5"
> > Option "ZAxisMapping" "4 5"
> > EndSection
> >
> > TIA
> >
> > Richard
