On Tuesday 13 March 2001 11:51, Norman Schmidt wrote: > Hi Russell! > > I have three VIA KT-based Duron servers. > One of them has an Adaptec 29160 card wirh an external IDE-to-SCSI (that > means the three 40 GB drives are IDE, but it behaves as if it were a 80 > GB (Raid 5) SCSI harddisk) RAID attached to it and two internal IDE > drives (each 20 GB). > > When we first installed Debian (2.2r0), we did this into a /boot and a > / partition on the SCSI drive, while the two internal drives were > attached (each as master on ide 0 and 1). > > First, it wouldn´t boot, but the lilo.conf manualpage and an old SUSE > handbook told us, that we had to remap the drives. > > Here is what we entered into lilo.conf: > > disk = /dev/sda > bios = 0x80 > disk = /dev/hda > bios = 0x81 > disk = /dev/hdc > bios = 0x82
Same as before then. What version(s) of LILO have you tried and had this result with? -- http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark http://www.coker.com.au/postal/ Postal SMTP/POP benchmark http://www.coker.com.au/projects.html Projects I am working on http://www.coker.com.au/~russell/ My home page
