Keith, Brian I have Epson 740 up and running with 360x360, 720x720, and 1440x720 resolutions. I use "enscript" and "ghostscript" to print. I have a all the necessary "printtab", "print filters", and a simple install script.
Send me a email if you want this information. -=[cwa]=- -- Christopher W. Aiken Scenery Hill, Pa, USA chris at cwaiken dot com www.cwaiken.com Debian GNU/Linux 2.2_r2 On Mon, 26 Feb 2001, Keith G. Murphy wrote: -> -> ->Brian S Enyart wrote: ->> ->> I've got an Epson 740 I've set up with magicfilter. ->> ->> When I attempt to print a file (user or root), the job queues up ->> normally, then disappears as if it had been printed, but it hasn't been! ->> I get no error messages, and if I ask lpr to send email on completion, ->> I get an email indication successful completion. I also get no in any ->> of the log files. ->> ->> When I first try to print, several modules get loaded: ->> parport, lp, parport_pc, and parport-probe ->> ->> My /etc/printcap (without comments): ->> ->> |lpep740|Epson 740|lp:\ ->> :lp=/dev/lp0:sd=/var/spool/lpd/ep740:\ ->> :sh:pw#80:pl#66:px#1440:mx#0:\ ->> :if=/etc/magicfilter/[EMAIL PROTECTED]:\ ->> :af=/var/log/lp-acct:lf=/var/log/lp-errs: ->> ->Where did you get the StylusColor-740 magicfilter from? I haven't seen ->that in the Debian distribution. What driver does it end up using? ->I've never gotten stcolor to work with my 740, but stp does. -> ->You might want to check out www.linuxprinting.org for further info. -> ->Also, are you dual-booting? I've found that Win95 bollixes up the ->printer, such that nothing but a hard reset (unplug/plug in) can get it ->working under Linux again. -> -> ->-- ->To UNSUBSCRIBE, email to [EMAIL PROTECTED] ->with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -> ->
