> In xconfig, I selected generic scsi support, scsi emulation, and scsi > CDROM.
I have this modules: sg 11776 0 (autoclean) loop 7584 0 (autoclean) sr_mod 16552 0 (autoclean) ide-scsi 7156 0 scsi_mod 49968 3 (autoclean) [sg sr_mod ide-scsi] ide-cd 22904 0 cdrom 26332 0 [sr_mod ide-cd] And all is working great.. you need this: (I am cutting and pasting take care it could contain some erratas!!) Sect. Description Module IDE ------------------------------------------------------------ BLOCK Enhanced IDE/MFM/RLL... Y BLOCK IDE/ATAPI CDROM ide-cd M BLOCK SCSI emulation support ide-scsi M BLOCK Loopback device loop M SCSI SCSI support scsi_mod Y/M SCSI SCSI CD-ROM support sr_mod Y/M SCSI Enable vendor-specific Y SCSI SCSI generic support sg Y/M FS ISO 9660 CDROM filesystem iso9660 Y/M FS Microsoft Joliet cdrom... joliet Y But read the HOWTO there you have all better explained.. you need the loop device to test the iso image.. Regards Roberto ------------------------------------------------------------------------ Roberto Diaz <[EMAIL PROTECTED]> http://vivaldi.ddts.net Powered by ddt dynamic DNS Powered by GNU running on a Linux kernel. Powered by Debian (The real wonder) Concerto Grosso Op. 3/8 A minor Antonio Vivaldi (so... do you need beautiful words?) ------------------------------------------------------------------------
