Hi everyone
I have two questions
1. is the ppp 2.4 with pppoe plugin debianize?
2. is DDC for my optiquest v95 and matrox G400 support under xfree86
4? coz I am getting error message saying:
<---- XFree86.0.log ---->
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.0.2, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.3
(==) MGA(0): Write-combining range (0xce000000,0x2000000)
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info
(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 300 MHz
(WW) MGA(0): Default mode "1600x1200" deleted (hsync out of range)
(WW) MGA(0): Default mode "1792x1344" deleted (hsync out of range)
(WW) MGA(0): Default mode "1856x1392" deleted (hsync out of range)
(WW) MGA(0): Default mode "1920x1440" deleted (hsync out of range)
(--) MGA(0): Virtual size is 1152x864 (pitch 1152)
(**) MGA(0): Mode "1152x864": 108.0 MHz, 68.7 kHz, 76.3 Hz
(**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(**) MGA(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz
(++) MGA(0): DPI set to (80, 80)
(II) MGA(0): YDstOrg is set to 0
<---- end of XFree86.0.log ---->
Thanx
Edwin Lau ([EMAIL PROTECTED])
