Cameron Matheson wrote:
not sure what it is but I have the same stuff in my log (and I have only one voodoo 3 video card and it works)Hi,I'm trying to get my voodoo3 working but i am having some serious problems... The computer boots up fine w/ the card in, and X works great w/ the "vesa" driver (other than no acceleration of course). If i try the "tdfx" driver, however, X goes crazy (the screen is bright shifting colors and the cursor is a gigantic black rectangle). After i kill X w/ ctrl+alt+backspace the console is ruined (looks a lot like X except in b&w) so i have to reset the computer. I have been trying to figure this out but so far no luck, i have attached my XFree86.log and my XF86Config-4 (and also output from dmesg). Here is the stuff that is probably significant although i am not sure: (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.1.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) TDFX(0): Softbooting the board (through the int10 interface). (II) TDFX(0): Primary V_BIOS segment is: 0xc000 (II) TDFX(0): Softbooting the board succeeded. Why is it softbooting my board? Isn't that only supposed to be done when you have two cards and one of isn't started at bootup by the bios?
I think this part right here is the major bad stuff: (II) TDFX(0): Failed to set dac value, bypassing CLUT (II) TDFX(0): Failed to set dac value, bypassing CLUT (II) TDFX(0): Failed to set dac value, bypassing CLUT (II) TDFX(0): Failed to set dac value, bypassing CLUT
don't have this though. are you sure you have tdfx kernel module compiled?
here's my config file:
### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf, the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
# dpkg-reconfigure xserver-xfree86
# as root. Also see "How do I add custom sections to a dexconf-generated
# XF86Config or XF86Config-4 file?" in /usr/share/doc/xfree86-common/FAQ.gz.
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/TrueType"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "pex5"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
Load "xie"
EndSection
Section "InputDevice"
Identifier "Logitech Cordless iTouch"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "logicordless"
Option "XkbLayout" "us"
EndSection
# don't forget xmodmap -e "pointer = 1 2 3 6 4 5"
# so that scrolling works (4 & 5 are the scrolling buttons in X)
Section "InputDevice"
Identifier "Logitech Cordless MouseMan Wheel"
Driver "mouse"
Option "CorePointer"
Option "Protocol" "MouseManPlusPS/2"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "false"
Option "Buttons" "6"
Option "ZAxisMapping" "5 6"
Option "SendCoreEvents" "true"
EndSection
Section "Device"
Identifier "3Dfx Voodoo3"
Driver "tdfx"
EndSection
Section "Monitor"
Identifier "SONY Multiscan 100sx"
HorizSync 30-65
VertRefresh 50-120
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "3Dfx Voodoo3"
Monitor "SONY Multiscan 100sx"
DefaultDepth 16
SubSection "Display"
Depth 1
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "800x600" "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Logitech Cordless iTouch"
InputDevice "Logitech Cordless MouseMan Wheel"
EndSection
Section "DRI"
Mode 0666
EndSection
### END DEBCONF SECTION
erik
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
