I had the same problem with my 3c905b. what i ended up doing was upgrading the modutils (i was running potato b4) to the "unstable" version. then i re-make modules and re-make modules_install. once i did this, i had to add the compiled mods to /etc/modules. If there is an easier way, let me know! i had to bang my head agaist the wall for a bit to figure out what was going on.
-frozen > > I've got 2 Debian 2.2 R2 systems. One has a NE2000 > ISA > NIC, and the other one has a 3Com 3C509 ISA card. > I've > recently updated the kernel to 2.4.0, and I'm having a > > great deal of trouble getting the network cards > working. When it is booting up I get errors > indicating > the device /dev/eth0 doesn't exist and it cannot load > the module. I've confirmed the needed modules are > compiled under /lib/modules/2.4.0/kernel/drivers/net. > > The NICs work wonderfully with the 2.2.18 kernel > shipped Debian. > > Has anyone ran into similar problems? > > Thanks, > Mike > > > __________________________________________________ > Do You Yahoo!? > Get email at your own domain with Yahoo! Mail. > http://personal.mail.yahoo.com/ > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
