Further to the dialog below I have investigated all the answers that I
have recieved and found that all are right (great, thanks) except the
answer below! I am not sure I fully understand this one.
(gtcd (for X) and cdcd (tty) both use ioclt calls that my kernel/cdrom
like (not sure if it is kernel or cdrom that is creating the error, this
might require a philosphical answer?))
Anyway in reference to Bill's comments below please offer further help.
Is the kernel option that is being referenced a compile time (.config)
option or is it a boot time option that I would pass the kernel via
lilo? I have gone through the kernel compile configuration using "make
config", and "make xconfig" and can not find the option mentioned.
Thanks,
MTY
>On Tue, Nov 28, 2000 at 12:34:03PM -0700 or thereabouts, Yobb wrote:
>>
>>Ah!
>>
>> Further to my Tue, 28 Nov 2000 11:34:49 -0700 email regarding my CDROM
>> problems the full error message that cdplay outputs is as follows:
>>
>> hdc: packet command error: status=0x51 {DriveReady SeekComplete Error}
>> hdc: packet command error: error=0x54
>
>There is a kernel option to correct the above error:
>
>Use multi-mode by default
>CONFIG_IDEDISK_MULTI_MODE
> If you get this error, try to say Y here:
>
> hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
> hda: set_multmode: error=0x04 { DriveStatusError }
>
> If in doubt, say N.
>
>This can be be turned on, but I don't believe it is in the default kernel.
>
>You could recompile to correct it I believe. As for the rest they may be
>solely a >result of the above problem.
>
>> ATAPI device hdc:
>> Error: Illegal request -- (Sense key=0x05)
>> Invalid command operation code -- (asc=0x20, ascq=0x00)
>> The failed "Play Audio TrackIndex" packet command was:
>> "48 00 00 00 01 01 00 0c 63 00 00 00"
>> hdc: packet command error: status=0x51 {DriveReady SeekComplete Error}
>> hdc: packet command error: error=0x54
>> ATAPI device hdc:
>> Error: Illegal request -- (Sense key=0x05)
>> Invalid command operation code -- (asc=0x20, ascq=0x00)
>> The failed "Play Audio TrackIndex" packet command was:
>> "48 00 00 00 01 01 00 0c 63 00 00 00"
>> cplay: ioctl cdromplaytrkind
>>
>> fun thing is that under X in an rxvt term I only get the error message
>>
>> cdplay: ioctl cdrompalytrkind
>>
>> Any help appreciated.
>>
>> MTY
>
>Bill
