On Tue, Dec 05, 2000 at 11:58:48AM -0300, Eduardo Gargiulo wrote: :Hi. : :I've tried your configuration and now I can ping the second interface (eth1) from the router, but not the other hosts. I run the following commands : :ifconfig eth1 200.16.224.3 netmask 255.255.255.255 up :route add -host 200.16.224.3 eth1 :route add -host 200.16.224.4 eth1 :route add -host 200.16.224.5 eth1 : :eth0 have 200.16.224.2 and the router 200.16.224.1 :The netmask is 255.255.255.248
First I'm not sure, my suggestion will work so don't bang your head on it for too long. Some things to check though: can you ping all machines from the box you're configuring did you echo 1 > /proc/sys/net/ipv4/ip_forward did you set the default gateway properly Another thing to try is a netmask calculator to make sure 255.255.255.248 is what you want. In fact if you're going that far figure out the masking you need on each interface so you don't have to bother with static routing. http://www.csc.fi/english/funet/calc/laskin2.html don't forget when playing with strange subnetting that the network address and broadcast will change too (this calculator shows all the info) -Jon
