Hi,
I do not know how to config the entire network, but you can configure the
files:
/etc/resolve.conf:
domain yourdomain.com
search yourdomain.com other_much_used_domain.org etc.nl
nameserver 1.2.3.4
nameserver 1.2.3.5
For networkinterfaces:
/etc/network/options
ip_forward=no (set to yes for ip-masquerade)
spoofprotect=yes
syncookies=no
/etc/network/interfaces
# /etc/network/interfaces -- configuration file for ipup(8), ifdown(8)
# The loopback interface
iface lo inet loopback
# The first network card
iface eth0 inet static
address 192.168.1.1
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255 //standard
gateway 10.0.0.138 //my internet gateway. Do not set
this when using ppp dialup connections (I belive)
Now to a ifup eth0 and all should work.
Greetz,
Sebastiaan
On Thu, 30 Nov 2000 [EMAIL PROTECTED] wrote:
> Hi folks,
>
> I got a new laptop hard drive yesterday so I'm reinstalling Debian 2.2.
> The install sequence didn't recognize my PCMCIA card, so networking
> didn't get configured. Long story short, I rebuilt the kernel and
> pcmcia and the card now works. That is, I can bring it up by hand
> using ifconfig.
>
> But things are still a bit underconfigured (there's no /etc/resolv.conf,
> etc.).
>
> What do I have to run to get Debian to redo the network config now
> that it can see the card?
>
> Thanks.
>
> --norm
>
>
> --
> To UNSUBSCRIBE, email to [EMAIL PROTECTED]
> with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
>
>
