take me off this list
--- Begin Message ---
debian-user-digest Digest Volume 100 : Issue 323
Today's Topics:
upgrading debian with an aol connect [ [EMAIL PROTECTED] ]
Re: IMWheel help [ Bob Nielsen <[EMAIL PROTECTED]> ]
Re: a whole bunch of questions [ Dave Sherohman <[EMAIL PROTECTED] ]
deb package documentation [ Stephen nyc <[EMAIL PROTECTED]> ]
Re: IMWheel help [ Snowfox <[EMAIL PROTECTED]> ]
Conexion a internet [ ROBERTOCALVENTE <[EMAIL PROTECTED] ]
Kernel-image 2.2.17 and disk write p [ Snowfox <[EMAIL PROTECTED]> ]
Re: upgrading debconf error [ Joey Hess <[EMAIL PROTECTED]> ]
Re: (Psion) plptools compilation err [ [EMAIL PROTECTED] (Colin Watson ]
kmail (kde2) and exim [ Mario Olimpio de Menezes <[EMAIL
PROTECTED] ]
Apt-Get troubles [ Wikoff <[EMAIL PROTECTED]> ]
Re: telnet doesn't find localhost [ Jeronimo Pellegrini <[EMAIL
PROTECTED] ]
Re: telnet doesn't find localhost [ Jeronimo Pellegrini <[EMAIL
PROTECTED] ]
Re: fsplit [ kmself@ix.netcom.com ]
Re: DB2 [ kmself@ix.netcom.com ]
Re: Help: gv not reading *.gz files? [ kmself@ix.netcom.com ]
Re: deb package documentation [ kmself@ix.netcom.com ]
duplicating setup machine [ John Chambers <[EMAIL PROTECTED] ]
Re: Conexion a internet [ Antonio Rodriguez <[EMAIL PROTECTED] ]
--- End Message ---
--- Begin Message ---
could somebody tell me how i could upgrade debian 2.2 trough an aol
connection with windows ;
downloading first the files to the hd and dselect with the file option ?
.~. Linux : le meilleur moyen de faire fonctionner ses neurones
/V\
// \\ Linux : the best therapy there is for somebody's brain
/( )\ debian 2.2 potato thanks tomsrtbt for the logo
^`~'^
--- End Message ---
--- Begin Message ---
I realize that the mouse won't work in both gpm and X (without the
repeat function) in many cases, but it does for me so I haven't really
questioned it (!) /dev/mouse is a symlink to /dev/psaux, of course.
I have a problem with gpm occasionally not working correctly, but
'/etc/init.d/gpm restart' always fixes that.
Bob
On Mon, Oct 23, 2000 at 10:44:14AM -0500, [EMAIL PROTECTED] wrote:
> I notice in your config that you don't have gpm being used as a repeater
> device (I.E. the -R option). That won't work will it? I've always had
> to make gpm repeat and have X use /dev/gpmdata in order to make gpm and
> X work correctly with the mouse. How can you get gpm and X to both work
> without that option? Is your /dev/mouse a symlink to /dev/psaux as I am
> assuming?
>
> I was able to get the scrolling wheel to work if I disabled gpm and used
> the IMPS/2 protocol in the X config file (along with the ZAxisMapping),
> but I couldn't get it to work with /dev/gpmdata and MouseSystems
> protocol, which are the two I've always had to use to get X and gpm to
> play nice. Is there another way?
>
> Rob
>
> ----- Original Message -----
> From: Bob Nielsen <[EMAIL PROTECTED]>
> Date: Saturday, October 21, 2000 12:30 pm
> Subject: Re: IMWheel help
>
> > On Sat, Oct 21, 2000 at 10:21:22AM -0500, [EMAIL PROTECTED] wrote:
> > > I'm trying to get m MS wheel mouse to work in X, but am having no
> > luck.
> > > I've gotten everything working but the wheel, and I'm tried
> > installing> imwheel and reading the docs, but the wheel still
> > doesn't work. I'm
> > > using the mouse in X via gpm (/dev/gpmdata), and nothing I have
> > tried> has worked. I've looked at the scrolling wheel help page,
> > but it didn't
> > > help either. According to the imwheel homepage, imwheel is
> > supposed to
> > > come with a special version of gpm, but that doesn't seem to be
> > the case
> > > with the Debian package. Can anyone help my get the wheel
> > working? Do
> > > I need that special version of gpm? Any help would be appreciated.
> >
> > The following works for me:
> >
> > In /etc/X11/XF86Config (/dev/mouse is a symlink to /dev/psaux):
> >
> > Section "Pointer"
> > Protocol "IMPS/2"
> > Device "/dev/mouse"
> > ZAxisMapping 4 5
> > Buttons 7
> >
> > In /etc/gpm.conf:
> >
> > device=/dev/psaux
> > responsiveness=25
> > type=imps2
> > append="-l \"a-zA-Z0-9_.:~/\300-\326\330-\366\370-\377\""
> > repeat_type=
> >
--
Bob Nielsen, N7XY [EMAIL PROTECTED]
Bainbridge Island, WA http://www.oz.net/~nielsen
--- End Message ---
--- Begin Message ---
On Mon, Oct 23, 2000 at 06:10:01PM +0200, robert_wilhelm_land wrote:
> The error recommends to use "xhost" - but this seems to be a GUI app
> and therefore dies for the same reasons as previously launching emacs.
> How can I help myself, would running xhost fruit in a working GUI when
> changing to su?
No, xhost isn't a GUI app, but you have to run in as the user you actually
logged in as (mosr specifically, as the user who owns the X session), not
sued to root. By default, root neither has permission to open windows on
your desktop, nor to give himself that permission.
BTW, if you're going to use xhost (it's not the most secure way of handling
this, but it is the easiest), use 'xhost localhost', not the name of your
machine. It'll open the door wide enough for anyone on your machine to put
windows on your desktop, but without allowing any possibility for someone to
do it over the network.
> Then, I cannot get my Diamond Sonic Impact 90 to work. gtcd starts,
> accepts the CD, playes the first track but the speakers remain
> quitely.
Have you turned the volume up? Try gom ('gom -it' on a command line) or
another mixer to see what your volume settings are if you haven't already.
> Oct 23 16:13:44 MINI kernel: hdd: packet command error: status=0x51 {
> DriveReady SeekComplete Error }
> Oct 23 16:13:44 MINI kernel: hdd: packet command error: error=0x40
> Which line could relate to the soundcard?
None of them are sound-related, but it looks like you've got some definite
problems with your CDROM.
> ...which states there should be somewhere a sound module, but
> cat /etc/modules.conf|grep -A 4 sound
> returnes no output.
Did you build your own kernel? If so, did you remember to make modules and
make modules_install? (Or module_install... I can never remember which it
is...)
> Does dselect build up a database for all indexed packages? I cannot
> find wine by running "dpkg -l wine" or "dpkg -l | grep wine" although
> the debian installation routine was fed by all 4 CD's. Neither does
> dpkg seem to support a query routine simular to rpm.
A database of available packages is maintained by apt. To search it, use
`apt-cache search packagename`. Once you know the name of the package, you
can get the details on it with `apt-cache show packagename`.
--
"Two words: Windows survives." - Craig Mundie, Microsoft senior strategist
"So does syphillis. Good thing we have penicillin." - Matthew Alton
Geek Code 3.1: GCS d- s+: a- C++ UL++$ P+>+++ L+++>++++ E- W--(++) N+ o+
!K w---$ O M- V? PS+ PE Y+ PGP t 5++ X+ R++ tv b+ DI++++ D G e* h+ r++ y+
--- End Message ---
--- Begin Message ---
Folks -
Where can I get a copy of the documentation included
in a .deb package (ipmasq specifically).
I haven't installed debian yet, and I'm currently
sitting on an NT box at the office.
Is this available on-line, or do I have to get it from
the package? Is there an NT based tool that will open
a .deb package?
Thanks for your help.
- Steve
__________________________________________________
Do You Yahoo!?
Yahoo! Messenger - Talk while you surf! It's FREE.
http://im.yahoo.com/
--- End Message ---
--- Begin Message ---
I use:
gpm:
mouse type imps2 coming off /dev/psaux, repeat type "raw"
x windows:
mouse type imps2 coming off /dev/gpm
I never have to restart gpm. The only time I have a problem is when
interrupts are missed for unrelated reasons; that sends the mouse
driver into a funny mode, from which you can recover by rolling the
mouse wheel back and forth a couple times.
On Mon, Oct 23, 2000 at 09:49:54AM -0700, Bob Nielsen wrote:
> I realize that the mouse won't work in both gpm and X (without the
> repeat function) in many cases, but it does for me so I haven't really
> questioned it (!) /dev/mouse is a symlink to /dev/psaux, of course.
>
> I have a problem with gpm occasionally not working correctly, but
> '/etc/init.d/gpm restart' always fixes that.
>
> Bob
>
> On Mon, Oct 23, 2000 at 10:44:14AM -0500, [EMAIL PROTECTED] wrote:
> > I notice in your config that you don't have gpm being used as a repeater
> > device (I.E. the -R option). That won't work will it? I've always had
> > to make gpm repeat and have X use /dev/gpmdata in order to make gpm and
> > X work correctly with the mouse. How can you get gpm and X to both work
> > without that option? Is your /dev/mouse a symlink to /dev/psaux as I am
> > assuming?
> >
> > I was able to get the scrolling wheel to work if I disabled gpm and used
> > the IMPS/2 protocol in the X config file (along with the ZAxisMapping),
> > but I couldn't get it to work with /dev/gpmdata and MouseSystems
> > protocol, which are the two I've always had to use to get X and gpm to
> > play nice. Is there another way?
> >
> > Rob
> >
> > ----- Original Message -----
> > From: Bob Nielsen <[EMAIL PROTECTED]>
> > Date: Saturday, October 21, 2000 12:30 pm
> > Subject: Re: IMWheel help
> >
> > > On Sat, Oct 21, 2000 at 10:21:22AM -0500, [EMAIL PROTECTED] wrote:
> > > > I'm trying to get m MS wheel mouse to work in X, but am having no
> > > luck.
> > > > I've gotten everything working but the wheel, and I'm tried
> > > installing> imwheel and reading the docs, but the wheel still
> > > doesn't work. I'm
> > > > using the mouse in X via gpm (/dev/gpmdata), and nothing I have
> > > tried> has worked. I've looked at the scrolling wheel help page,
> > > but it didn't
> > > > help either. According to the imwheel homepage, imwheel is
> > > supposed to
> > > > come with a special version of gpm, but that doesn't seem to be
> > > the case
> > > > with the Debian package. Can anyone help my get the wheel
> > > working? Do
> > > > I need that special version of gpm? Any help would be appreciated.
> > >
> > > The following works for me:
> > >
> > > In /etc/X11/XF86Config (/dev/mouse is a symlink to /dev/psaux):
> > >
> > > Section "Pointer"
> > > Protocol "IMPS/2"
> > > Device "/dev/mouse"
> > > ZAxisMapping 4 5
> > > Buttons 7
> > >
> > > In /etc/gpm.conf:
> > >
> > > device=/dev/psaux
> > > responsiveness=25
> > > type=imps2
> > > append="-l \"a-zA-Z0-9_.:~/\300-\326\330-\366\370-\377\""
> > > repeat_type=
> > >
>
> --
> Bob Nielsen, N7XY [EMAIL PROTECTED]
> Bainbridge Island, WA http://www.oz.net/~nielsen
>
>
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
>
--- End Message ---
--- Begin Message ---
Hola, me llamo roberto y os escribi un e-mail el otro dia. Mi pregunta
era y sigue siendo la siguiente:
como me puedo conectar a internet con Linux?????
Tengo instalada la Debian 2.2 potato, un modem zoltrix externo 56k y
pentium 200 MMX.
Lo intenté con el wvdial y parece que conecta ya que el modem hace el
ruido estridente de comprobar el ancho de banda, y luego me comprueba
el login y el password del ISP, a continuacion me pone starting pppd.
Por lo que supongo que ha conectado. Sin embargo, cuando ejecuto el
netscape no entra en ninguna pagina, solo me sale conect loking
www.direccion que le doy y ya esta no puedo entrar en ninguna pagina.
Por favor, si alguien sabe como puedo arreglarlo mandenme un e-mail a
[EMAIL PROTECTED]
Gracias.
___________________________________________________________________
Consigue tu e-mail gratuito TERRA.ES
Haz click en http://www.terra.es/correo/
--- End Message ---
--- Begin Message ---
I'm using the 2.2.17 kernel-image on a system. The whole system
seems to pause briefly when commiting data to the IDE hard drive.
This has never happened with my own kernel builds, however I
can't see any relevant differences in the configuration.
I just tried this on another system and I see a similar effect;
one has a BX chipset, the other a VIA 82c686a chipset.
Any clue what's likely causing this?
--- End Message ---
--- Begin Message ---
Jaume Teixi wrote:
> Setting up debconf (0.4.02) ...
> Can't locate object method "value" via package
> "Debian::DebConf::Question" at /usr/lib/perl5/Debconf/Config.pm line 31.
>
> dpkg: error processing debconf (--configure):
>
> how can I proced with shuch error ?
This is fixes in debconf 0.4.03, which in in Incoming now and will be
installed in a few hours.
--
see shy jo
--- End Message ---
--- Begin Message ---
[EMAIL PROTECTED] wrote:
>[EMAIL PROTECTED] (Colin Watson) writes:
>> The code then compiles fine - well, there are a few warnings
>> (two-digit years - I can only hope this is just something that the Psion
>> link protocol requires), but nothing fatal.
>
>Now I get:
>
>Making all in plpftp
>make[1]: Entering directory `/home/andre/plptools-0.6/plpftp'
>g++ -DHAVE_CONFIG_H -I. -I. -I../include -I../lib -O2 -Wall -c ftp.cc
>ftp.cc: In method `int ftp::session(rfsv &, rpcs &, int, char **)':
>ftp.cc:339: warning: `%c' yields only last 2 digits of year in some locales
>ftp.cc:369: warning: `%c' yields only last 2 digits of year in some locales
>ftp.cc:461: warning: `%c' yields only last 2 digits of year in some locales
>ftp.cc: In function `char ** do_completion(char *, int, int)':
>ftp.cc:916: ANSI C++ prohibits conversion from `(char *, int)' to `(...)'
>ftp.cc:937: ANSI C++ prohibits conversion from `(char *, int)' to `(...)'
My fault for not testing it before suggesting you install
libreadline4-dev. :)
I can get it to compile by inserting the cast '(CPFunction *)'
immediately before 'command_generator' in line 916 and immediately
before 'filename_generator' in line 937 (so I end up with
'matches = completion_matches(text, (CPFunction *)command_generator);',
etc.).
I can't swear that all this is actually going to work; the suggestions
I've made are the correct ways to get the code to compile, as far as I
know, but they may mask other problems. If it doesn't *run*, the author
is probably the best person to hassle. :)
>Maybe there's something wrong with my development equipment?
No, your development environment seems to be behaving exactly the same
way as mine, and I'm pretty sure mine works.
Cheers,
--
Colin Watson [EMAIL PROTECTED]
--- End Message ---
--- Begin Message ---
Hi,
I'm trying to use kmail from kde2 as MUA but it's not relating
well with exim.
Whenever I try to send an email, after set mail smtp host and
port, exim complains about DATA being sent before RCPT TO. The exact
message is:
Response: 503 Valid RCPT TO <recepient> must preced DATA
Is there any special configuration for kmail to use exim.
[]s,
Mario O.de Menezes "Many are the plans in a man's heart, but
IPEN-CNEN/SP is the Lord's purpose that prevails"
http://curiango.ipen.br/~mario Prov. 19.21
http://www.revistalinux.com.br
--- End Message ---
--- Begin Message ---
I have just installed debian with the minimum install option. I was in the
process of using apt-get to install blackbox (my favorite windowmanager )
when I had some depend problems I let apt-get download the depends and
finished the install.
The problem I am having is now when I use apt-get I get a seg. fault:
line 20 185 seg. fault $APTGET $OPTS update
update available list script returned error exit status 139
No matter what I do with apt-get I get a seg. fault.
Any Ideas??
Shane
--- End Message ---
--- Begin Message ---
:: Michael P Soulier writes:
> I have a /etc/init.d/network script on my potato box with these commands:
> #! /bin/sh
> ifconfig lo 127.0.0.1
> route add -net 127.0.0.0
Hm, I did
socrates:/home/jeronimo# ifconfig lo 127.0.0.1
socrates:/home/jeronimo# route add -net 127.0.0.0 netmask 255.0.0.0 lo
And still it didn't work.
But in my /etc/init.d/network, I had only the first line.
J.
--
Jeronimo Pellegrini
Institute of Computing - Unicamp - Brazil
http://www.ic.unicamp.br/~jeronimo
mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
--- End Message ---
--- Begin Message ---
:: Christoph Simon writes:
>> > Hello...
>> >
>> > This is probably a known problem. I checked the BTS some time ago,
>> > and tehre was a bug filed against telnet, I guess... It couldn't
>> > resolve "localhost".
> Do you have an alias for localhost, something like
> 127.0.0.1 localhost mybox.mynet
Yes:
127.0.0.1 localhost socrates loghost
And I can't telnet to loghost either.
> I remember having had a similar problema (long time ago), and since
> then I always give a local address to ``mybox.mynet'', which is
> different from 127.0.0.1
What do you mean? How did you do that? (Or, where can I find some more
info about it?)
Thank you!
J.
--
Jeronimo Pellegrini
Institute of Computing - Unicamp - Brazil
http://www.ic.unicamp.br/~jeronimo
mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED]
--- End Message ---
--- Begin Message ---
on Mon, Oct 23, 2000 at 02:36:17PM +0200, Danny Lathouwers ([EMAIL PROTECTED])
wrote:
> Dear community,
>
> Does anyone know whether the fsplit utility is packaged?
> (fsplit splits binary or source files in more likable pieces).
$ apropos split
returns, among others, split:
$ man split
It's part of the textutils package.
--
Karsten M. Self <kmself@ix.netcom.com> http://www.netcom.com/~kmself
Evangelist, Opensales, Inc. http://www.opensales.org
What part of "Gestalt" don't you understand? There is no K5 cabal
http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org
GPG fingerprint: F932 8B25 5FDD 2528 D595 DC61 3847 889F 55F2 B9B0
pgp6ntrhd1svu.pgp
Description: PGP signature
--- End Message ---
--- Begin Message ---
on Mon, Oct 23, 2000 at 08:37:42AM -0500, Cavaiani, Don ([EMAIL PROTECTED])
wrote:
> I have downloaded DB2 for Linux from IBM. I am on version 2.0.38. Has
> anyone tried to install this trial DB2 on Debian yet?? Will it work with
> 2.0.38 or do I need to upgrade??
>
> If upgrading is necessary, can someone point me to a simple set of
> instructions. If I upgrade, will I likely lose some of the "settings" I
> currently have ??
Your kernel version shouldn't matter.
DB/2 installs vary in success. I've had some luck installing a release
this past spring on Red Hat, though I found none of the individual
documentation sources were sufficient to make this happen. I posted
results to a number of newsgroups, you might try a Deja search for
details.
Note that DB/2's default installation directory is something horribly
broken like /bin/db2 or /usr/db2, and that it comes in RPM only, last I
checked.
--
Karsten M. Self <kmself@ix.netcom.com> http://www.netcom.com/~kmself
Evangelist, Opensales, Inc. http://www.opensales.org
What part of "Gestalt" don't you understand? There is no K5 cabal
http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org
GPG fingerprint: F932 8B25 5FDD 2528 D595 DC61 3847 889F 55F2 B9B0
pgpFkW7UyKY7T.pgp
Description: PGP signature
--- End Message ---
--- Begin Message ---
on Mon, Oct 23, 2000 at 05:12:51PM +0200, Jonathan Gift ([EMAIL PROTECTED])
wrote:
> Hi,
>
> I have no trouble reading *ps.gz files using hghostview and gv under
> Mandrake, but loading ghostview and gsfonts under Debian I find myself
> unable to open *.gz ending files. I have to uncompress them to read. Any
> thoughts? Maybe a default config Mandrake used but Debian doesn't?
Try looking at what Mandrake's "gv" executable is. Even odds says it's
a shell script wrapper which will decompress and view a compressed file.
Try:
$ zcat foo.ps.gz > /tmp/foo.ps && gv /tmp/foo.ps
--
Karsten M. Self <kmself@ix.netcom.com> http://www.netcom.com/~kmself
Evangelist, Opensales, Inc. http://www.opensales.org
What part of "Gestalt" don't you understand? There is no K5 cabal
http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org
GPG fingerprint: F932 8B25 5FDD 2528 D595 DC61 3847 889F 55F2 B9B0
pgpU2Aqro2FTC.pgp
Description: PGP signature
--- End Message ---
--- Begin Message ---
on Mon, Oct 23, 2000 at 10:19:58AM -0700, Stephen nyc ([EMAIL PROTECTED]) wrote:
> Folks -
>
> Where can I get a copy of the documentation included
> in a .deb package (ipmasq specifically).
What exactly do you mean?
Do you want a description of the .deb file format, or the contents of a
specific .deb file?
Format is described under the developer's section of documentation at
debian.org. A .deb is a shell archive (shar) file, you can extract
cotents with "ar -x" on any GNU/Linux or Linux-like system.
> I haven't installed debian yet, and I'm currently
> sitting on an NT box at the office.
>
> Is this available on-line, or do I have to get it from
> the package? Is there an NT based tool that will open
> a .deb package?
--
Karsten M. Self <kmself@ix.netcom.com> http://www.netcom.com/~kmself
Evangelist, Opensales, Inc. http://www.opensales.org
What part of "Gestalt" don't you understand? There is no K5 cabal
http://gestalt-system.sourceforge.net/ http://www.kuro5hin.org
GPG fingerprint: F932 8B25 5FDD 2528 D595 DC61 3847 889F 55F2 B9B0
pgpZFBBv9UFcx.pgp
Description: PGP signature
--- End Message ---
--- Begin Message ---
What are the easy ways to duplicate an existing
setup debian machine to other machines?
John Chambers
--- End Message ---
--- Begin Message ---
Shortly: Thinks connects to isp with Debian 2.2 potato, modem zoltrix external
56k,
pentium 200 ,wvdial. Netscape does not go beyond "looking"
If you want wide help, write in English -si quieres amplia ayuda, escribe en
ingles-.
ROBERTOCALVENTE wrote:
> Hola, me llamo roberto y os escribi un e-mail el otro dia. Mi pregunta
> era y sigue siendo la siguiente:
>
> como me puedo conectar a internet con Linux?????
>
> Tengo instalada la Debian 2.2 potato, un modem zoltrix externo 56k y
> pentium 200 MMX.
>
> Lo intenté con el wvdial y parece que conecta ya que el modem hace el
> ruido estridente de comprobar el ancho de banda, y luego me comprueba
> el login y el password del ISP, a continuacion me pone starting pppd.
> Por lo que supongo que ha conectado. Sin embargo, cuando ejecuto el
> netscape no entra en ninguna pagina, solo me sale conect loking
> www.direccion que le doy y ya esta no puedo entrar en ninguna pagina.
>
> Por favor, si alguien sabe como puedo arreglarlo mandenme un e-mail a
> [EMAIL PROTECTED]
>
> Gracias.
>
>
> ___________________________________________________________________
> Consigue tu e-mail gratuito TERRA.ES
> Haz click en http://www.terra.es/correo/
>
> --
> Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null
--- End Message ---