If you are using ide-scsi emulation, do not access cd-rom drive with ordinaery ide-cdrom driver. cdrecord is accessing ide-cdrom drive.
add lilo.conf (if cd-rw is hdc) append="hdc=ide-scsi" softlink /dev/scd0 -> /dev/cdrom edit fstab (No more /dev/cdrw) /dev/cdrom /mnt/cdrom iso9660 defaults,ro,user,noauto 0 0 That what I do with my cdrw. Regards, Osamu On Mon, Oct 02, 2000 at 08:01:55PM -0400, Jacob Stowell wrote: > Hi group, > > I was wondering if anyone might be able to help me figure out how to > mount my cd-rw drive. I was able to install it and get it to record > cd's, but I have been unable mount it and use it like a regular cd-rom. > In other words, when i place a music cd or a data cd into that drive, no > disk is detected. I have compiled support for scsi-emulation into the > kernel--at least all of the ones that were recommended in the CD-writing > How-To. I have tried to mount this drive both manually and through > fstab, to no avail. below I have included some information that may be > useful in determining what the problem may be. Thanks much for any help > on this matter. > > The CD-RW that I have installed is an Acer 4232A 4X2X32 > > when I try to mount the cd-rw manually this is the response i get: > > satchel[/home/jake]% mount /dev/scd1 /mnt/cdrw > mount: block device /dev/scd1 is write-protected, mounting read-only > mount: No medium found > > here are the entries in my fstab file: > > /dev/cdrom /mnt/cdrom iso9660 defaults,ro,user,noauto 0 0 > /dev/scd1 /mnt/cdrw iso9660 defaults,ro,user,noauto > 0 0 > > this is the output from the cdrecord -scanbus: > Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling > Linux sg driver version: 2.1.38 > Using libscg version 'schily-0.1' > scsibus0: > cdrecord: Warning: controller returns wrong size for CD capabilities > page. > 0,0,0 0) 'E-IDE ' 'CD-ROM 32X/AKU ' 'U10I' Removable > CD-ROM > 0,1,0 1) 'ATAPI ' 'CD-R/RW 4X2X32 ' '4.AR' Removable > CD-ROM > 0,2,0 2) * > 0,3,0 3) * > 0,4,0 4) * > 0,5,0 5) * > 0,6,0 6) * > 0,7,0 7) * > The output from cat /proc/modules: > > cs4232 2960 0 (unused) > uart401 6416 0 [cs4232] > ad1848 16848 0 [cs4232] > sound 58608 0 [cs4232 uart401 ad1848] > soundcore 2768 5 [sound] > loop 7904 0 (unused) > ide-cd 23792 0 > ide-scsi 7504 0 > lp 5520 0 (unused) > parport_pc 7600 1 > parport 7824 1 [lp parport_pc] > tulip 30848 1 -- + Osamu Aoki <[EMAIL PROTECTED]>, GnuPG-key: 1024D/D5DE453D + + Fingerprint: 814E BD64 3288 40E7 E88E 3D92 C3F8 EA94 D5DE 453D + + === http://www.aokiconsulting.com ======= Cupertino, CA USA === +
