hi ya... try using the RT1839 driver instead ???
have fun alvin http://www.linux-1U.net....3 NIC 1Us.....1U Raid5.... On 29 Sep 2000, Arcady Genkin wrote: > I have a D-Link 530 card using a compiled-in via-rhine driver as eth0. > The card is talking to an identical card in a computer that runs > FreeBSD. I'm seeing collisions on the Linux side of the link, and am > wondering what parameters I should pass the kernel to force the card > into Full-duplex 100base mode, and how to pass those params. (I > already did that on the FreeBSD side). > > FWIW, here's the output from ifconfig and dmesg: > > ,----[ dmesg ] > | via-rhine.c:v1.01 2/27/99 Written by Donald Becker > | http://cesdis.gsfc.nasa.gov/linux/drivers/via-rhine.html > | eth0: VIA VT3043 Rhine at 0xe800, 00:50:ba:a9:13:f6, IRQ 10. > | eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link 0000. > | PCI latency timer (CFLT) is unreasonably low at 32. Setting to 64 clocks. > `---- > > ,----[ ifconfig ] > | eth0 Link encap:Ethernet HWaddr 00:50:BA:A9:13:F6 > | inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 > | UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > | RX packets:448934 errors:0 dropped:0 overruns:0 frame:0 > | TX packets:266302 errors:0 dropped:0 overruns:0 carrier:0 > | collisions:7766 txqueuelen:100 > | Interrupt:10 Base address:0xe800 > `---- > > Thanks! > -- > Arcady Genkin > Don't read everything you believe. > > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null >
