Hi, I got a debian 2.2 set up but I do not get ISDN to run. I want to use an AVM PCI Card which run under SuSE so it should be no hardware proplem or similar.
I have read the ISDN-Howto and the chapter in the debian linux guide. The problem occurs when I try to load the hisax module via modconf. The messages in syslog look like this: Sep 25 16:45:33 ramses kernel: HiSax: Linux Driver for passive ISDN cards Sep 25 16:45:33 ramses kernel: HiSax: Version 3.3e (module) Sep 25 16:45:33 ramses kernel: HiSax: Layer1 Revision 2.37 Sep 25 16:45:33 ramses kernel: HiSax: Layer2 Revision 2.20 Sep 25 16:45:33 ramses kernel: HiSax: TeiMgr Revision 2.13 Sep 25 16:45:33 ramses kernel: HiSax: Layer3 Revision 2.10 Sep 25 16:45:33 ramses kernel: HiSax: LinkLayer Revision 2.40 Sep 25 16:45:33 ramses kernel: HiSax: Approval certification valid Sep 25 16:45:33 ramses kernel: HiSax: Approved with ELSA Quickstep series cards Sep 25 16:45:33 ramses kernel: HiSax: Approval registration numbers: Sep 25 16:45:33 ramses kernel: HiSax: German D133361J CETECOM ICT Services GmbH Sep 25 16:45:33 ramses kernel: HiSax: EU (D133362J) CETECOM ICT Services GmbH Sep 25 16:45:33 ramses kernel: HiSax: Approved with Eicon Technology Diva 2.01 PCI cards Sep 25 16:45:33 ramses kernel: HiSax: Card 1 Protocol EDSS1 Id=line0 (0) Sep 25 16:45:33 ramses kernel: HiSax: AVM driver Rev. 2.11 Sep 25 16:45:33 ramses kernel: HiSax: AVM A1 hscx A fifo port 0 already in use Sep 25 16:45:33 ramses kernel: HiSax: Card AVM A1 not installed ! Thanks for any hint Clemens
