> With this arrangement, pppconfig can't autodetect the modem... Pppconfig uses pppd to "autodetect", but why do you care? You know what port to use. Just select it manually in pppconfig.
> But it'll take me a while to get this working... Why? Just set up demand-dialing on it with pppconfig, make it the gateway for your other box, and you'll be off and running. > cat /dev/ttyS1 | tee /dev/ttyS2 &; cat /dev/ttyS2 | tee /dev/ttyS1 & Same > result. pppconfig sends "AT", receives "OK", sends loads of garbage > ending with "Loopback detected", and selects the correct port. pon, > however, sends nothing at all. Pppd expects a real serial port. It could take a long time to get this working. You're doing it the hard way. See above. -- John Hasler [EMAIL PROTECTED] (John Hasler) Dancing Horse Hill Elmwood, WI -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
