On Fri, 11 Aug 2000 kmself@ix.netcom.com wrote: > On Fri, Aug 11, 2000 at 10:02:44PM +0200, A. Demarteau (linux rules!) wrote: > > dear debian users, > > I'm having trouble with the above controler kernel 2.2.14 and two > > scsi-units > > one is a fujitsu external MO-drive the other is a internal tape-drive. > > Both are seen correctly on the scsi-card bios during startup. > > THe linux-kernel sees them correct as well but then times-out on both of > > them without any specific reason. > > Now I already set the timeout after reset in the kernel to 20 secs, but > > that doesn't help at all. > > Any suggestions (please reply private as well). > > regards, > > Have you confirmed all cables are properly seated, and that you have > proper termination, if necessary? for the tape-drive I'm pretty sure it's okay, I temporarely removed my burner form the scsi-bus and used that cable for the tape-drive. As internal-device it has no terminator, besides when not terminated correctly it should not get through the cards bios-startup as well (which it does correctly).
> > -- > Karsten M. Self <kmself@ix.netcom.com> http://www.netcom.com/~kmself > Evangelist, Opensales, Inc. http://www.opensales.org > What part of "Gestalt" don't you understand? Debian GNU/Linux rocks! > http://gestalt-system.sourceforge.net/ K5: http://www.kuro5hin.org > GPG fingerprint: F932 8B25 5FDD 2528 D595 DC61 3847 889F 55F2 B9B0 > ----------- Andor Demarteau [EMAIL PROTECTED] -----------
